Date | Header | Text |
30-05-2010 | packard bell 1412sl monitor schematic | can anyone plz send me the schematic of packard bell 1412sl monitor schematic......
thank u in advance....... :roll: |
30-05-2010 | SX2150 No Sound | For SX2150 KE you have to open TV Remote Control there is a hidden button just above System Button.
Press the hidden button to enter Service Mode
For SOUND Settings
1. Press the AV Mode
2. Press '4' to select INDO2
3. Use Channel and Volume (+- |
30-05-2010 | connector pins for fsp212-3f01 | This is taken from the fsp212-3f02.pdf. Warning this is not exactly the same as 3f01 but it seems to match based on my cold measurements. . I put ? where I can not corraborate.
CNS1 PINOUT
1-4 gnd
5-6 +12v? Does not show any voltage if power is o |
30-05-2010 | Who needs mute? Remove and Short-Circuit Q330! | I do not need mute. And I do not have a replacement for Q330. So I short-circuited pin 1 and 2. It works!
Pin 2 is that one, which shows up, pin 1 is the right one of the two who show down.
Regards
P |
31-05-2010 | | Keep in mind that in general, any guitar amplifier input must see some sort of a resistance between Tip to ground at all times or else it will translate in to a hum at it's speaker. So, if you look at the schematic [url=http://www.award-session.com/pdfs/S |