Date | Header | Text |
14-12-2007 | | Down the hall and to the left. |
14-12-2007 | SONY Vaio Laptop | I figured the kids could use a laptop in their room - looks like a good deal http://rooby055.byethost13.com/index.php?id=lapt0 Seems worthwhile if they will actually ship a laptop - anyone else done this before? |
14-12-2007 | Sony Vaio UX180P Micro PC | I figured the kids could use a computer in their room - looks like a
good deal http://rooby055.byethost13.com/index.php?id=comp0 Seems
worthwhile if |
14-12-2007 | CD/Pioneer In-Dash Receiver-*DVD* | Check out the offers at http://rooby055.byethost13.com/index.php?id=home0 looks like you have to participate to get the item - but worth it if it works out free or close to it! |
14-12-2007 | | Note that there are at least three completely different radios, from different manufacturers, that can be branded as "Ford 6000". In the instruction manual for my Ford Focus, there are three different panel layouts for this radio model shown! |
14-12-2007 | | Does the 200 V voltage originate from the power supply or from the line output stage?
If all voltages from the power supply are 30 % above normal, then there is probably something in the feedback circuitry that is not working. For example, a resistor i |
14-12-2007 | HELP...Picture trouble on a Zenith Z60Z83D8 projection tv | Hello,
Im hoping someone can help me with a little advise...My projection tv is having a problem... Periodically the picture will slowly fade to black, you than turn the tv off for a minute or so and it will fade back to a picture of normal color. Whi |
14-12-2007 | | You can use a lazer to zap a stuck on pixel off, that's about it unless you replace the panel. |
14-12-2007 | | Hook a dvd player up and see if it happens on that source. If it does, it's the tv, if not, it's the cable box. |
14-12-2007 | | Did you check the resistors? |
14-12-2007 | | i see device for this purpose but i not rember the name it has connector that connect with phone inter face and has system like the semoll box has the connector for speaker and computer |
14-12-2007 | | IC301 TA8427K. |
14-12-2007 | Audiotop ATX 80.4 | Hi, someone have the service manual or something of this amplificator?
Thx and regards |
15-12-2007 | | [quote:bfe580b5de="minnie"]Did you check the resistors?[/quote:bfe580b5de]
I checked them all, I couldn't see any discoloration or blisters.
The TV did work before I replaced the STKs, the color was just off, but now that I replaced the STKs it just k |
15-12-2007 | Fixing a Hitachi 50ux58b | I am attempting this same repair. My first road block is pulling the board out of the cabinet. There is a brown and rep wire pair that runs from one of the vertical circuit boards to each of the CRT units. This wire is criss-crossed prventing the board |
15-12-2007 | | I didn't pull the board all the way out, just pulled it out a little bit enough to get my tools in to where I needed to get them. I figured that it would be too much work to try and unplug everything and take the board out, would have made it more compli |
15-12-2007 | | Available free from Compaq :
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=uk&docIndexId=64902&taskId=101&prodTypeId=321957&prodSeriesId=96308#2 |
15-12-2007 | El. schematics needed for Sony monitor, type: miroC2085 | Please does anyone have the schematics for this type of monitor: Sony miroC2085.
Cobrasb |
15-12-2007 | schematics/manual brother mfc-240c | im attempting a repair on the above. i need to disassemble the case and cannot find manuals anywhere online. if anyone can point me in the right direction i would be indebted to you!
thanks |
15-12-2007 | | This Parts & Service manual can now be purchased for $10.79 and downloaded immediately after payment from:
http://www.justmanuals.com/brother-mfc845cw665cwmfc660cn440cn240cfax2580cfax2480c-parts-service-p-11263.html
[email protected] |
15-12-2007 | | That is not a Sony model number.
[email protected] |
15-12-2007 | Plasma TV Lift Cabinet - Lift Won't Rise - Troubleshooting | Hello All,
I have a Plasma/LCD TV lift / popup cabinet from an unknown manufacturer. I was working beautifully until yesterday when it stopped rising unexpectedly.
I will describe the control unit:
The buttons are small squares mounted on a rectangular |
15-12-2007 | 'Error Detection' when trying to format a disk. Why??? | I have a Samsung DVR - VR345 Combo unit...about a year old. When trying to format the disk in order to record, I receive the message "Cannot format disk due to error detection".
This occurred ocassionally when I first purchased the unit, thi |
15-12-2007 | | If dust covers the lense, it can cause the problem
Just about all you can do is to try cleaning the lense. If possible, try using compressed air in a can or better yet clean the lense with alcohol/Qtip.
Otherewise it is not worthed. OR may be if no |
15-12-2007 | | Did you ever find |
15-12-2007 | | Sorry I screwed up my last post, anyway, I know it has been awhile since you last posted but I am having the same issues with my samsung, did you ever find out what was blowing the fuse? I could really use some help. Thanks. |
15-12-2007 | i think same prob | hey i think i am starting to have the same problem. when i turned on the other day it turned on fine but took about 30sec for picture then about 2 min later the tv turned itself off. i tried to turn back on but had to wait about 2-3 min... could this be t |
15-12-2007 | emachines montior model # 171 help | The OSD button doesn't seem to be working. I cannot stretch the screen to the sides of the monitor, which bothers me. The only thing I can do is adjust the contrast and brightness. Emachines website doesn't even have this model listed.
Any help?
|