Date | Header | Text |
22-11-2009 | changing language | the language in my tv got changed to some chinese or japanese language and i dont have the manual wid me.. so anyone please help me out.. the id of my remote control is "t-2909abs" |
22-11-2009 | sony avd-k800p speakers buzzing | sony avd-k800p dvd player after about an hour will start buzzing in speakers or have a distorted sound |
22-11-2009 | | Very good to here! One question... I've used a 5 mm pitch PP cap, that was clearly to small that I fixed with a small cable extension. I should have used a 10 mm, but you used 15 mm. Wasn't that really to large pitch? |
22-11-2009 | | Presumably this had all been working normally and this fault developing.
Sounds like one of the output devices in the amplifier be it chips or transistors is breaking down..... or it could be a capacitor or regulator that is causing the problem.
Fro |
22-11-2009 | | Sorry I forgot to add...
... if the fault clears with the DVD player disconnected then the fault lies withing the DVD player itself AND NOT the amplifier, which would point down to a capacitor or regulator problem in the DVD player.
Dave |
22-11-2009 | lens will not close on cyber shot | need part # for the gear for the lens |
22-11-2009 | | Use a translator site to look for the word "language" in the suspected Chinese or Japanese? |
23-11-2009 | | Replace the audio IC 903 #6-700-813-01 |
23-11-2009 | | Huh, well, here's the results I've got so far.
C4104 (50v/15uF) wouldn't pull up a reading on my (up to 700uF) meter. It hung it every time I plugged it in, and gave weird readings if I had it plugged in while I turned it on (the instructions were kind |
23-11-2009 | | Bleh, looks like this is one of those times when the edit button "goes". Maybe it's a forum permissions configuration issue. :?
Anyway, meant to edit that it's a 500uF meter, not 700. Innywho... I pulled out C4108 (nasty bugger, right betwe |
23-11-2009 | Reset Prestting channels Sony KV 19216R TV | My old Sony KV1926R TV has several channels preset. The remote doesn't work at all.
How can I reset the channel presets so that all channels will come up in order when I push the channel up button on the front of the TV? The manual talks about using |
23-11-2009 | | O.K. to go 1 or 2 "steps" up in voltage (if the lytic can physically fit), I'd try to stay with the SAME value though.
Remember, electrolytic have 4 main failure modes (five, if you include "bulging"), bad Value and ESR being the mo |
23-11-2009 | | Program a "Universal" remote! :wink: |
23-11-2009 | | With that in mind (good value but bad ESR) then it's settled, I'm just gonna replace all 3 of 'em :lol:
So I'll try and grab the same values for everything but if they only have a step up higher voltage that's about the same size, I'll grab that inst |
23-11-2009 | I need to upgrade version of PSP | Hello Everyone,
My name is William Parkar and I am residing at Kenya. I have bought a PSP
one year ago and it is doing well till now. I want to upgrade the old version into
new version but I have not knowledge about where to upgrade so anybody
have |
23-11-2009 | cd 6000 ford | someone who has the wiring diagram radio cd 6000 ford?
I have to replace one built but I have his initials
Help me please
thank you from ITALY |