|02-02-2008||Your best bet would be to go to the websites of conrols manufacturer's. They have a wealth of information on controls for all kinds of heating and cooling systems as well as training courses.
|03-02-2008||need the code||heyy does anybdy know what the code is to apply my sky reoe to the bush 11ak37 please|
|03-02-2008||rewinding MOT not working out.....||hello,
i'm wondering why my voltages are not up to par on a welder project i am building. i removed the secondary winding from a working MOT and as per the instuctions, wound about 5 turns of 12 ga. wire in the secondary place as a temporary winding jus|
|03-02-2008||Theres a service program for SAMSUNG SCD 352, 353 ??||Hi friends...
In service mode, adjustments, i cannot found the solution for FIREWIRE iee1394 TX SLAV ERROR (this is message that appears in lcd)
So, i wondering if exists some service program to this models...
Thank´s for some help.|
|03-02-2008||Do you have the ieee 1394 card installed in the camera? If you don't, then that's what the error is. If you do, there is a problem with it.
|03-02-2008||Thanks for the pointers! I didn't need to swap the red and blue cathode feeds I did a visual inspection first and noticed the red feed resistor burnt out, although it still measured 560 ohm. Replace the feed resistor, still no joy. Quickly checked the |
|03-02-2008||I have managed to order them from CPC, still interested to know where else I could have got one, CPC seem a bit poor compared with when I used to use them 10 years ago. ie. very limited resistors available...|
|03-02-2008||hi can you send me a foto of the cd mechanism.i need to see a top foto of your open cd tray.|
|03-02-2008||my mail is email@example.com|
|03-02-2008||Technical Manual ROTEL RT-950BX||Download Technical Manual ROTEL RT-950BX|
|03-02-2008||Akai Gx-95||Could anyone please send the AKAI GX-95 (NOT GX-95MKII) Owner's Manual and Service Manual to firstname.lastname@example.org.
|03-02-2008||thanks for the info. I'll go buy it now.
|03-02-2008||schematic please||I need AKai AA-1040 schematic|
|04-02-2008||You probrably got cheap IC's. In mine the red was out, I bought cheap IC's and replaced them-still red was out and in about 4 min-it went totally out and chirping was heard from somewhere on the board. I felt the heatsinks and one was cool,one was real ho|
|04-02-2008||Repair the head for 76V Samtron.||PN17ltpn/xac - 76V, 17in., 1280 x 1024, .24mm, 70KHZ (Samtron)
I need help with being able to add on a head for the cord. I currently have no head/pins to input into the graphics card. I need help with establishing which wire connects to which pin. S|
|04-02-2008||Sony CTV KV-2966AS - Horz output||Yep the Horz o/p was shorted. Was a prick to get to. Anyway so far I have replaced with new the flyback tx, horz output and IC601 in the power supply. The set still won't startup and is still making a whining sort of noise. I don't know if it's just a few|