Date | Header | Text |
23-07-2007 | | Don't know your modle# but it seems like Caps that are about to go dry, and bad joints all over. |
23-07-2007 | | Minnie; i really wonder what's the issue here. I've tapped HARDER on the neck of the crt with a rubber screwdriver. Picture went rock solid black, and the 'VIDEO 1' text on the screen suddently went as clean as it could be. I hooked a video signal, and sc |
24-07-2007 | | So are you saying your set shuts down in tuner mode and comes back on video 1? |
24-07-2007 | BOARD REPAIR | Did you take the board in only or the whole plasma itself? |
24-07-2007 | canon 6050 service manual | Dear Sir,
Good day, I have a canon 6050, i have a problem on it, Can anybody out there could help me, i have a problem the moment you switch on the unit, there is a code appears on it, the code is e800, and i dont know what it is. please help.
cesar |
24-07-2007 | | Nope ! The set came back to solid black background color when being set to VIDEO1 input without any input connected. The VIDEO1 text came back from an ugly fuzzy state like in the image i posted, to a CLEAN green bright text.
I switched to the tuner in |
24-07-2007 | | This Parts & Service manual can now be purchased for $10.79 and downloaded immediately after payment from
http://www.justmanuals.com/product_info.php?products_id=8853
[email protected] |
24-07-2007 | Samsung SyncMaster 550b VGA Cable Pin Outs | Hi,
I have a Samsung 550b, but the VGA connector needs to be replace. Does andyone have the pinouts for this cable.
Ideally I need a list of the VGA Pins and what colour lead should be attached to it.
I believe there is some jumpering at the VGA |
24-07-2007 | I don't know how to search for a Service Manual | Hi all:
I am searching for a Service and User Manual for,
Wavetek Model 164 30 MHz Sweep Function Generator.
Thank you very much for your help in advance.
Grey |
24-07-2007 | | Thanks |
24-07-2007 | nokia 6280 service manual | Can someone send me a nokia 6280 service manual
[email protected]
thanks |
24-07-2007 | NELLCOR POWER SUPPLY | I NED NELLCOR MODEL:DSC100E POWER SUPPLY CIRCUIT |
24-07-2007 | | Does anyone know what i need to do , if i have "safe" on the radio screen after when i enter radio code[code:1:66762a9c2e][/code:1:66762a9c2e][img][/img][list:66762a9c2e][/list:u:66762a9c2e] |
24-07-2007 | Платка за звук за шаси TX92F Telefunken DG2855H | Моля ако някой е поставял звукова платка за този тип шаси да даде някакви инструкции. Не съм сигурен изобщо дали ми трябва такава платка или може само чрез настройка да се постигне D/K звук в този телевизор. Бях в 'Сервизен режим' и видях че съществуват в |
24-07-2007 | | http://www.justmanuals.com/product_info.php?products_id=12764
$9.99 and instant download.
[email protected] |
24-07-2007 | | there isn't a service manual but you can find only a list (with position) of the fuses.
What problem do you have in that console? |
24-07-2007 | sony kv-m2151u | hi!my sony trinitron was off when away for two weeks, on my return after switching it on, the screen was all white, but could still hear sound, any help appreciated! |
24-07-2007 | IR 2016J | Hy,i need somme help on this model.After power on ,a message appear on the screen"Download Standby",and i can't make any copy,this message not dissapear.I try many times a reset method on service mode,i change battery on PCB,i try general reset, |
24-07-2007 | xantia 2000 radio-cassete | Does somebody knows how to change the AM frquency steps fom 9 to 10 khz?Thanks a lot. |
24-07-2007 | Hi Frank, the tv is less than 2 yrs old | [quote="Frank"]Don't know your modle# but it seems like Caps that are about to go dry, and bad joints all over.[/quote]I am not sure what you mean caps gone dry but it sounds like this would be from age the tv is less than 2 yrs old last |
24-07-2007 | | The error codes and the simulations for Canon copiers are explained in the service handbooks.
http://www.justmanuals.com/product_info.php?products_id=12574
$10.79 and instant download.
[email protected] |
24-07-2007 | | Eh, you are wrong there fellow. I have Playstation service manuals on my site at http://www.justmanuals.com/advanced_search_result.php?keywords=playstation&x=0&y=0
These are Sony manuals.
$9.99 each and instant download.
[email protected] |
24-07-2007 | | Thanks but i dont't see the reason to buy a handbook becouse there is nothing to explain this.I ask for help not for manuals.This copier is boot on Download mode(reason is main controler PWB),i ask for help here,becoose,maybe is there any body,they have t |
24-07-2007 | | If you'r elooking for help then I suggest you post on one of the copier repair boards, most boards won't help an end user, but you can try. Its doubtful anybody here can help you.
[email protected] |
24-07-2007 | Re: Mitsubishi CS3525R Dead at power up | [quote:7da466fc98="rcdsr"]Please help, This is second post, set turns on then off instantly, I have checked/changed C914,C916,C965,C940,q906,D907,and R956. I have also checked for poor solder @ T557 Can someone please help?[/quote:7da466fc98]
Any luck |
24-07-2007 | Amp schematic for Acoustimass 20 | Hi
Can anyone help me find one of these please? Two satellite amps are ok, bass amp is not working. I need the schematic please.
Thanks
Phil |
24-07-2007 | My RCA 52" projection tv has no video, menu works fine | My 52" RCA Projection tv has no video regardless of the video source going into it. The menu for the tv works fine. I get no snow on channels i don't have. the model number is P46811LV. the chassis number is ptk195aa. the sound works fine. Ple |
24-07-2007 | My 52" projection tv has no picture , menu works, sound | My 52" RCA Projection tv has no video regardless of the video source going into it. The menu for the tv works fine. I get no snow on channels i don't have. the model number is P46811LV. the chassis number is ptk195aa. the sound works fine. Please hel |
24-07-2007 | Thomson 28WS72J - 402/ICC9 - Picture problem | Hi
I was hoping i can find help here. As you can see its a Thomson 28WS72J - 402/ICC9 , and the problem is a scan issue whereby the picture is to big for the screen and any vertical lines near the edge of the screen are warped inward.
I hope this make s |
24-07-2007 | | Check/replace C708. Also Replace C5H6 2200 @ 16v, main problem, & D907 change in value (ECG 552) Try this. |
24-07-2007 | | Try replacing Q26110, also Q18110 and R18124. |
24-07-2007 | | Mike, please post the model number. Or I'll have to get you a priest! :roll: |
24-07-2007 | | E Bay has been a good place for me to send my customers to. |
24-07-2007 | | Is the convergence out? |
24-07-2007 | | Usually the whole set if they wont do it in home. |
24-07-2007 | | You could try replacing the flyback. |
24-07-2007 | | Look for a plug that says xray protect. It should be near the STK392-110's. Unplug it if the set comes on, replace the STK's. |