Date | Header | Text |
23-05-2008 | | Whats the model #? |
23-05-2008 | dvd electronia ds-n808 | i have a dvd electronia mod. ds-n808 end i need a reference of integrad u304 in power supply board
please help me |
23-05-2008 | | Model MD20F12 |
23-05-2008 | problem tunning philips tvwith sky box | Can you help me on this. I have a Philips TV that can't be tuned into sky. It has autostore function and finds Sky picture on 847Mhz but no sound, even when I try fine tune I can't get sound. I have tried other televisions and they work fine. This tele wo |
23-05-2008 | | Just making a guess here, do you try changing from cable to antenna to see if you get sound? |
23-05-2008 | | Sure it's not MW20F12?
http://www.partstore.com/PartSearch.aspx?PartNumber=72783201&x=16&y=12 |
23-05-2008 | | Hi minnie,
With everything hooked up again, the Va and Vs reads 0v.
As I mentioned before, since I replaced the fuse in the YSUS, when I plug it in and press power, the light on the front goes from red to blue for a second then back to blue and the |
24-05-2008 | VW Golf MK3 - Central Locking problem | Basically I own a MK3 Golf...potentially not for much longer as it probably going to get stolen. Here's the problem...
I lock the Car in the usual manner only to discover on my return it has unlocked itself again.
I believe its something to do with |
24-05-2008 | | Model MD20F12, verified.
However, you got me to thinking about parts and I found on the Vance Baldwin site the model and part!! Bass-ackwards, the part (72783471) can also be found on Parts Depot, too. Since it is about $40 vs $58 on your part, it m |
24-05-2008 | | I also wanted to ask....
If I did buy the new DVD assy, does it just "go in" or will I need a scope or something to make adjustments?
Thx, Lar |
24-05-2008 | | In addition, with the YSUS board unplugged, I fluctuating readings of 1 -2 v at the 5v pins. |
24-05-2008 | | (72783471 is the correct number for mechanism--only)
wait a sec;
Most manufacturers sell their DVD mechs complete(mechanism & all electronics) & if that was the case with Toshiba, I'd say to change it & be done with it.
However, unless i |
24-05-2008 | sony dvd recorder rdr gx210 | Hello friends,
I need a circuit diagram for the power supply of SONY RDR GX 210
The power regulator is blown up with no identifiable number. If some one knows the part ID can you please lett me know. Thank you . :( [/b] |
24-05-2008 | My Lumina's Audio cassette PLayer | Hi all,
I have Chevrolet Lumina 2001 model & I bought it as used car.
the problem is in my cassette Player which is locked (as I think) by a code I didn't get it from the previous owner.
How can I get the code of the audio cassette player?
|
24-05-2008 | Sharp Acquos Firmware | I have a LC45GD4U that I bought a few years ago and moved to Norway from Texas. The TV has a problem that I believe is called Clayface in that the colors of people are pasty. I know there is a firmware upgrade, but I can't get the Sharp representative in |
24-05-2008 | Re: NOKIA Service manual | [quote:31da8205c1="bosco"][quote:31da8205c1="Batzeo"]Does anyone has service manual for NOKIA 6020 ? It doesn't start the SMPS.[/quote:31da8205c1][/quote:31da8205c1] |
24-05-2008 | | hi
replace 5V regulator near prosessor IC, resolder power supply & EHT section neetly. |
24-05-2008 | | hi!! if you want my help just e-mail me at [email protected] bacause i have only first timer in this site. If you have a diagram i can surely help you |
24-05-2008 | need of substitute of la47201p | hello every body ,because i can't find "la47201p" i wonder if there is a change for it.thanks in advance for any one who gives me answer. :) |
24-05-2008 | hitatchi c32wf523n-311 | Hi...
My hitatchi tv has recently decided to keep turning itself off. It will do the several times before settling down. Does anyone have any information on what this may be. I think it sounds like a leaky cap.... Any help will be most appreciated. Thanx |
24-05-2008 | | This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from
http://www.justmanuals.com/nokia-cellular-telephone-6230-6230b-parts-service-p-14381.html?osCsid=1p0mk9r0e57qqmfclia187m973
Paul@justmanual |
24-05-2008 | | I remember going back some years and had a high end Pioneer system that was faulty. I managed to locate a schematic for it with some difficulty but none of the components on the pcb's were marked with reference numbers making servicing difficult. :evil: |
24-05-2008 | | Hi V,
Sadly, I have to confirm your understanding of the scenario. Broken up DVD pic at idle and TV (via antenna) works fine. Also, you are saying that if the "signal process" is defective, then the tray won't open (these issues are tied t |
24-05-2008 | | Just looked at the schematic & sure enough, it is not inclusive with it's electronics(it is a seperate board that sits on the top of mech)
To answer your question; yes, if there is a signal process issue at the start up(broken/pixlated picture), i |
24-05-2008 | | Hmmm. I have to go to the in-laws (in their 90's!) to setup their new computer. I will have another go at it tomorrow and I will get back on this. Yes, diminishing return is just over the horizon. When I last opened it up, I had removed the DVD assy and |
24-05-2008 | | Whether it will solve the problem you described? not sure but software upgrades are not that difficult provided you know computers & if feel uneasy, do not try it yourself. In general your contact point should be where you purchased it (USA). It is pr |
24-05-2008 | | [quote:e513c44427="Tushy"]Hi minnie,
With everything hooked up again, the Va and Vs reads 0v.
As I mentioned before, since I replaced the fuse in the YSUS, when I plug it in and press power, the light on the front goes from red to blue for a second |