|24-10-2007||Hitachi TV C21-RM37S vs C21-RF37S||Hi
Is there a chance to make the hitachi tv C21-RM37S same as C21-RF37S, the point is the RM series doesn't provide a sound 4.5MHz.
How can I make this TV to work with NTSC Signal and have a sound too.
I am from Istanbul-Turkey. I have encouneterd same power-blinking-not-recording-not-playing problem for few days. I had lost almost all my hope to find any solution.
Now my NV-DS60 works as it was before.
Thanks to all people who|
|24-10-2007||Get the model number and Google it. Take the lowest price from what you find online and offer 50% of that. Find out how old it is and if it's working or not.
From past esperience, I would definetly NOT buy from a friend if you want to stay friends with|
|24-10-2007||Lookn for a Ricoh Aficio 450 manul||Hi...I'm lookn for a Ricoh aficio 450 repair manual with the parts list.
|24-10-2007||megane 2 sedane||i also need for a megane 2 sedane service manual.
if somebody can help me, my e-mail is firstname.lastname@example.org
|24-10-2007||This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from
|24-10-2007||Sony STR-DE475||Fault: Goes into "Protect"
I've measure all end amp ok.
|24-10-2007||Circuit schematic needed: SONY CMT 101||HI,
I need to fix my SONY CMT 101, as per this thread: [url]http://forum.eserviceinfo.com/viewtopic.php?t=3231[/url], but I have no circuit diagrams to locate the transistor and resistor that need fixing.
Can anyone supply this diagram to help, please?
|24-10-2007||Projektor HP vp6110||Need to know what IC6201 are? It has been burnt that i can not see the text what it is.
$9.99 and instant download.
|24-10-2007||I need service manual LG STUDIOWORKS 221U||Hi!
Has someone service manual for LG STUDIOWORKS 221U, chassie CB221BU?
thanks in advance
|24-10-2007||Check the UPC2585.|
|24-10-2007||Need schematic for Sencore va48 video analyzer||Can some one help out here? I am trying to troubleshoot the power supply in my Sencore va48. If some one might have a schematic for this
unit I would greatly appreciate it! thanks John|
|25-10-2007||Re: RP52 PROJ||[quote:4a7dfe1935="ESDAVE"]JUST SAW YOUR REQUIST FOR INFO ,DO YOU STILL NEED INFO ON RP 52 .IF SO EMAIL ME . I HAVE HAD ALOT OF EXPERIENCE ON SAME.[/quote:4a7dfe1935]hi there i could do with help on rp52 ukn|
|25-10-2007||kenwood RXD-355||everytime i go to turn my stereo up loud, a protect thing comes up.how do i fix it?|
|25-10-2007||ford 4000 rds||I'm looking for my radio keycode my radio type is ford 4000 rds when its went to servis after that it wants to code 4 i have keycode but its work its certanly wants code 4 pleasa help me about this topics thanks too much|
|25-10-2007||very good. Thanks for that.
|25-10-2007||Could any of the people who have successfully changed the transistor Q330 and jumper JW307 (or is it JW370?) please share with me the LOCATION of these parts, please?
I cannot find the appropriate service manula for diagrams and need some help in locatin|
|25-10-2007||Q330 Location||If you remove the cover you will see a pcb on the right hand side with the surface mount components on the side facing you. If you take a picture and post it on here I will be able to locate the transistor for you.|
|25-10-2007||will do, sidsparks, although model is actually cp101 and not cmt101 as originallythought. However, CP101 schematic also has q330 transistor, so I'll take a pic and post it anyway.
Could you also point out jumper that needs replacing with 470 ohm resistor|
|25-10-2007||OK, here it is:
I've put notes on the first to identify what I think are the right components - that's how they're labe|
|25-10-2007||Q330 Location||Looks like you have identified the correct components. It looks like the same model that I replaced components in.
I'm sure there must be info already on web regarding replacing SM components.|
|25-10-2007||Thanks, sidsparks. It's good to know when you get something right!
I'll research the de-soldering and re-soldering bit.
Should I replace the transistor AND put a 470ohm resistor in place of the jumper, or jst do one of them?
|25-10-2007||Have this set and the screen is 'shaky' has anyone got any ideas what the problem is? Can I adjust something in the Service menu or is a component blown that needs replacing?
Any help would be grateful.|
|25-10-2007||Diagrama for Sharp 19C14OS||Hi I need the diagrama for Tv Sharp 19C14OS.
|25-10-2007||Toshiba SD-V280 Snowy Picture||Hi there! I had one of these Tohisba SD-V280 DVD/VCR combos cross my bench today, and I'm looking for some tips. It has a very snowy picture while playing back video tapes, but the picture is fine through the DVD player and the tuner. I cleaned the vid|
|25-10-2007||Can I de-solder and replace with just a standard DIY soldering iron? it looks like the component is very small and there's lots of little solder points very close together!
|25-10-2007||ef601 sounds like it may be a fuse. you can try calling pioneer and see if you can get that part.|
|25-10-2007||Sounds like a RF modulator/tuner problem. In the old days, you could repair or replace the part.
If i am not mistaking, pretty much all of their dvd/vcr units are cheap non-field serviceable units.
Cheap crap not worth to be messed with.---cross |
|25-10-2007||Replacing Q330||You can use a standard soldering iron but make sure it has a fine tip. you will also need some fine solder.
Have a look at this.
Use the same technique that is used for removing the 0603 res|
|25-10-2007||[quote:35d8b1c667="Nibbos"]Should I replace the transistor AND put a 470ohm resistor in place of the jumper, or jst do one of them?
I replaced both.|
|25-10-2007||APC UPS repair tips ?||Does anyone have some tips on APC UPS repairs ? What typically goes bad in these units. There must be a common failure component for most of these ?|
|25-10-2007||So is it the flyback ? & if i change the flyback can the problem be solved ? what else problem can be solved & what's RTV ? help me with those questions plz . when i adjust the control ( fucus ) on the flyback the picture becomes perfect but the s|