Date | Header | Text |
03-09-2008 | | Thanks minnie,
just posted in the other categorie,
Greets
Johannes |
03-09-2008 | 25" Console TV Need To Release Vacuum Safely | Is there a way to stabalize the vacuum in a CRT tube without causing it to implode, I dont want to just fire a gun at it outside and clean up the mess, Im looking for a way to do it safely without breaking to much glass. |
03-09-2008 | | as i can recall, some curtis mathis sets have a little "vacation" switch, first make sure it is not engauged, then check the power supply |
03-09-2008 | A Good Source For Small Replacement Speakers | Radio Shack no longer carries any, is there a supplier online that offers replacement speakers, not car audio speakers or large woofers for component speakers but smaller ones of lower ratings, like 4" and 4 3/4" full range drivers for portable |
03-09-2008 | Re: 25" Console TV Need To Release Vacuum Safely | [quote:9a7acdf5ff="AshTray900"]Is there a way to stabalize the vacuum in a CRT tube without causing it to implode, I dont want to just fire a gun at it outside and clean up the mess, Im looking for a way to do it safely without breaking to much glass.[/qu |
03-09-2008 | | did you check the power going to both the red and yellow wires???????// |
03-09-2008 | Panasonic SA-PM17 (SAPM17) | Hello..
Need service manual... especially 5CD mechanics..
Thanks |
03-09-2008 | mtsubishi vs-45609 | Minnie
I have been looking for the pico fuse but I can't find them I found resistors,I found the chasis grdI also found a fuse that states its A heater im thinking it may be a thermistor I still have not been able to try and see if the voltage is presen |
03-09-2008 | Zenith Projection TV | Thanks for the info. I looked all over the CRT board several times and I'm sure there is no reference designator R5102. I found E5102, Q5102 and C5102. |
03-09-2008 | | Looks like it's 24 volts. R8C60 .47 ohm 2 watt protects the -24 and R8C59 is the same rating and protects the +24. Look closely at the signal board for fluid leakage also. Look good everywhere. |
03-09-2008 | | Should be there. You sure E5102 isn't R5102? |
03-09-2008 | old hitachi changes channel | I use this old 13" Hitachi TV to monitor video projects. It frequently resets itself to #2. Why is it doing this? |
04-09-2008 | Zenith Projection TV | HI: I checked again and there is a R5101 and R5103, 5104, but no 5102. The E5102 comonent is a brown squarish part mounted on leads about a 1/4 inch above the board. The component has a slit going across the top of it. Therre are three of these, E5102, E |
04-09-2008 | hitachi 60sx1k | no pic. have menu on screen thanks for any help |
04-09-2008 | | Hi edtrussell, is there any chance that you can make the photos of the IC (8DIP) and FET transistor, which are located in the power section after filter capacitor, because one of the mechanics changed those parts and I'm not sure for the values. If you ha |
04-09-2008 | | If the channel selector uses touch buttons, then a common cause for resetting to a specific channel is dirt around the touch buttons, causing leakage currents.
Another possibility is that flashovers within the CRT or on its surface causes trouble with th |
04-09-2008 | Re: Sony G420 Monitor Control Lock | [quote:8ca7a41867="mikehenden"]Hi. I'm hoping somebody can help me with this... I have had this monitor for some years now. When I had it serviced last year I got it back with the screen lock applied. I phoned the technician who did some research and told |
04-09-2008 | RE: Sony G420 Monitor Control Lock | [quote:09f04ff403="SZASZ"]Hello
What do you mean with "with the screen lock applied''
the osd is LOCKED OR ..?[/quote:09f04ff403]
The OSD is well and truly locked - menu button (and all the others) are locked, so it cannot be unlocked in the m |
04-09-2008 | Minolta Dynax 500si | Hello,
I'm searching free scan from "Dynax 500si Repair Manual".
Thank you in advance
Balt |
04-09-2008 | hifi sanyo | hello everione need your help.
i have a sanyo micro hifi music system model DC-DA 1300M and I need to know the reference number of the output stage ic. Because it burn out .
Can anybody help me?
My mail is [email protected]
Thanks anyway. |
04-09-2008 | Need schematic for PV4c | Hello everyone,
I have a peavey amplifier PV 4C. Sometimes I get some background noise in the left channel. I need a schematic diagram to fix this problem. Can anyone assist me please. |
04-09-2008 | sharp 32f641 turns off after start no flash codes.Help! | Thanking you for your help---
Sharp 32f641 mfg date 03/03.. unsure of purchace date.
I am renting this home. I do not want to contact homeowner?
After power on tv shuts down after 5 sec. there are no flash codes to read.
It has an obvious prot |
04-09-2008 | Service manual for HP LaserJet M1120 printer | Hallo.
I locking service manual for HP LaserJet M1120 printer.
Best regards
Andrzej |