Thanks for information. I will try to watch for this capacitor.
It does not memorise even the last volume position.... ;-)
PS : Yes i could let it on but what about the planet.....|
|16-05-2008||The 6.3 amp fuse you're replacing is a fast blow. You need to replace it with a 6.3 slow blow.|
|16-05-2008||Re: Panasonic CT36HX40 keeps blowing PS fuse.||[quote:36a0f26824="Chuck Cintron"]Hi...I've dabbled in digital electronics as a hobby but not much experience with analog. I just need some guidance as to how I should go about trying to fix this problem, or at least how to talk to the service tech about|
|16-05-2008||Sounds like a 'no brainer' to me. I couldn't resist.
|16-05-2008||Hyundai 4240 Plasma TV power supply fault||Hi anyone got more info on this Plasma Screen Hyundai 4240 - power supply is DGW-420W board I have replaced c-19 and c-97 1uf 300volt caps - fault is switch on green power led comes on screen flashes for a second then hear the relay drop out green led on |
|16-05-2008||phillips 42 inch plasma||i had the usual fault on this phillips 42 inch model # 42pf5320/10 picture
no sound bought kit consisting of y sus, z sus and ctl brds and plasma turned on but i now have a picture with a vertical shift downwards by about a quarter of the screen and the |
|16-05-2008||Philips chasis L6.2||Hello if anybody can help me after a little time the tv is on the remote and local functions stop working.
I replaced t7500 t7505 and zeners and all capasitors.
|16-05-2008||onkyo||onkyo tx-sv525, not working in surround mode|
|17-05-2008||Superstar 2400 Radio||Was looking for a service manaul for this radio, the gentleman who I used to look after the radio has now retired and hoping to find some one who could help me with it as it has failed on me. It has been modified to covet the whole of the amature band as|
|17-05-2008||Thanks. I'll try to get the 6.3A fuse, but I think something is up with this set...why would the fuse have blown in the first place anyway.
Um, minnie, why would I replace a fast fuse with a slow-blow?
|17-05-2008||no it's ok :(|
|17-05-2008||MAGNAVOX 50MF231D/37 50HD||Help needed: I just purchased a used, non working unit MAGNAVOX 50MF231D/37 50HD. The symptoms are: As I try to power it up I hear 2 clicks, blinks and that's it! No picutre, no nothing and it goes back playng dead. I was told it needs a new power pack. I|
|17-05-2008||Further...Does anyone know where I can get this power supply board (LJ44-00108C PS-504-PH Part REV: 0.7) for less? Tks again....|
|17-05-2008||samtel monitor model sv 350||sir,
i am working in monitor service .my samtel monitor problem power led working but dont come sm output 70v .what i do say ? please help me .
|17-05-2008||Sharp Refrigerator service manual||I have this Sharp Refrigerator SJ-212EA and it has a PCB for Compressor/Fan/defroster heater controller, and it does it work. The problem seems to be one big chip its a 14x2 pin chip which I cannot make out, Its been years since I have tried to fix it and|
need a replacement for the transformer on the power board for
Vison F173 17 inch lcd monitor . SN23311701709.
the numbers on the part are 339R-2800000 , HJC 0308Q
|17-05-2008||Is it a constant blink or cycles?|