|14-08-2009||Re: Workaround on ACER AL1511||[quote="donz"]Hi. I have the same problem with Acer AL1511 monitor on AcerPower F1 PC. It initially appears to start up fine then goes blank with a "No Signal" message display. I am able to prevent this from happening by constantly jig|
|14-08-2009||Re: Too complex for me, what about you?||[quote:e041229171="thezman007"]Hi all and thanks for reading,
I have an uninterruptible power supply that has problems.
First some background:
I have an OMNIVS1000 from TrippLite. I knew I was leaving for a while so
I unplugged it from the w|
|14-08-2009||I am a realitive novice with LCD TVs, but have been working on LCD Monitors and TVs enough to know that it isn't as cut and dry and just add the power to it. Someone else can back me on this.
In most TVs, there not only is power going from the PS to the|
|14-08-2009||I don't know how I missed them but I found 2 bulging high voltage caps on the power supply board. I didn't know they were blown until I compared them to the other two high voltage caps with flat tops. Curiously, the service manual has wiring diagrams for |
|15-08-2009||Thank you very much! I wasn't sure I'd ever get a response that would help. :) If I could I just want clarification. I am to test for continuity WHILE the relay is energized, right?
|15-08-2009||Sorry to hear that. That is awful!--nothing short of highway robbery. Not sure how it operates in Australia but if I had to go thru that in the US, I would raise holly hell with Marantz
Wish I could help. If you want, I could sen|
|15-08-2009||From what I have read (I have the same problem with mine) its the High Voltage Transformer and the High Voltage splitter. I was going to get the parts and try to fix it myself but I have heard that the HV Transformer packs potentially fatal elect. so I'm |
|15-08-2009||Infinity SSW 210 has no audio output||:roll: ordered a STK4050V today from Newark - hard to find part and still no schematic. thanks for the part number which I also determined after removing the heatsink. I'm really not looking forward to replacing the 18 pin IC|
|15-08-2009||Schematic - Blaupunkt Hamburg MP57||Hello, I need schematic for car radio Blaupunkt Hamburg MP57. Tanks in advance.
|15-08-2009||450 volts @ 330 micro farid 105 degree temp rating.|
|15-08-2009||Hate to say it but instead of dummping money into the unit buy a new palyer. This stuff is not designed to be fixed economically.|
|15-08-2009||Did you meter the batteries you bought new?|
|15-08-2009||I did write a letter to Marantz Australia who are the guys who serviced it (Qualifi) and they just ignored it. Can you believe the idiot there told me it was because I was using old CD pressings and the machine would reject such discs even if the discs ha|
|15-08-2009||Never mind, I don't ususally post questions w/o research and thought, but I jumped the gun :oops: Figured out to energize it myself. Thanks again.|
|15-08-2009||Panasonic or is it a Phillips?|
|15-08-2009||Yes I did They voltage was @9.2V. I mess up on amp. Will have to redo that part...
Does any body know who sells Light Speed equipment? Or where they are located?
I'm the same person just different Id name.....
|15-08-2009||Philips FM620 user manual||Afternoon all,
I have just located this site,and have found it real interesting.
I volunteer for a local Community radio station in town,and we have just been given an old (I believe) Phili[ps FM 620.
The problem with it is that there is no user manual|
|15-08-2009||[img] http://www5.snapfish.com/slideshow/AlbumID=311170026/PictureID=7538994026/a=211656026_211656026/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfish/ [/img]
These images are the relay(right?). Power Relay 2 amp 10 volts DC I believe. I don't know what 6k|
|15-08-2009||Almost there... :)||Ok, so I have posted way too freaking much :D , but I am excited to have a lead on this project again!!! One last question (for now) would I be able to use something like this?
|15-08-2009||If it's a very simple supply with the three voltages you mention and ONLY has a power supply turn-on line (which IS behaving normally) then its simply a matter of providing the three different voltages. Hopefully at the current stated on the supply (or Hi|
|15-08-2009||Panalips (Or Philsonic)? :lol:|
|15-08-2009||Ok that you have already ordered it but I thought you were going to do some measurements first. STK series amps can and do fail but you should always do some voltage readings.
|15-08-2009||[quote:9f3b9396a0="minnie"]Hate to say it but instead of dummping money into the unit buy a new palyer. This stuff is not designed to be fixed economically.[/quote:9f3b9396a0]
While you are correct on majority of them, that particular unit was & st|
|15-08-2009||geez, 48000 members here?!|
|15-08-2009||This unit was also multi region and I read somewhere how to do a factory reset and did that. It was suggested to fix the problem. Now I have just noticed the unit only plays region 2 discs and I can't find a hack anywhere.
Any ideas anyone?|