|27-03-2010||61MP1 update...||OK... Now that I have read all the problems with the caps and the half screen problem mine is now doing it! I'm hoping that the screen jumping problem is related to the capacitors as well. I'm going to change them out and see... If anyone has any other |
|27-03-2010||angelat||Got the money order fri afternoon,shipped board Sat morning should be there in 3 to 5 days.|
|27-03-2010||Grundig Satellit 500 radio||I purchased this radio on E-Bay and it arrived DOA [ no sound] A local radio shop says they will look at it but i must provide them with service manual and schematics. Thanks in advance to anyone that can provide these. Frank in Canada
|27-03-2010||yamaha RX-V1800||I just had my RX-V1800's dsp assembly changed as what the yamaha technician ordered after it had problems of staying in the on position. My problem now is when i tried to set it up particularly using the basic menu, i couldnt go through the manual set-up |
|27-03-2010||I HAVE PROBLEM WITH MY TV TOSHIBA MODEL NO.CX32D60||I HAVE A TV TOSHIBA MODEL NO: CX32D60 MANUFACTURED SEPTEMBER 1994 SERIAL NO:58678489 .WHEN I FIRST STARTED TV IT PUT ITSELF A BLACK SPRIPE ALONG THE BOTTOM OF THE SCREEN ABOUT 1 INCH BUT AFTER THAT IT DID NOT START ANY MORE ,WHEN I TRY TO START IT THE |
|27-03-2010||You can get the Grundig Satellit 500 service manual with schematics at www.schematics.me|
|27-03-2010||i believe the problem is in the cd player, i found a fault that will shut the amplifier down on power up. It is a plastic gear on a motor shaft under the 6cd cassette (the motor drives the cd selector drive forwards and backwards), a little difficult to g|
|28-03-2010||Samsung S5033 Plasma Problem||Model: HP-S5033, Model Code: HPS5033X/XAA, Type: CD50P7
Initial problem: loss picture sound was ok.
I found a 6.3A fuse blown (F5002) on the 50'HD W1 Y-MAIN (Model No on board, not sure if that is really a hyphen) PCB Code: LJ41-04516A.
I replaced the |
|28-03-2010||need e2p,hex or bin file for aoc 9klr monitor||hello guys, i need e2p,hex or bin file for AOC 9klr monitor. anyone can give me will be much appreciated... thanks in advance|