Date | Header | Text |
04-10-2009 | | You don't gave the model.
The possible reasons could be a broken or slack tape belt, the door release mechanism or if it's one of these machines that has a reversible head... plays tapes in two directions then it could be the reversing cam.
Sometime |
04-10-2009 | | I would try and disconnect the power for about three or four minutes and try a re-set... get the memory cleared of any bugs.
Dave |
04-10-2009 | | If the back lights are working the screen should be all pure white... you shouldn't have to go peeping round the back to see the light.... you omitted to tell us what the front of the screen is like, white or dark or in between
If the screen isn't whi |
04-10-2009 | | Excuse me? I did give the model. It's right there in my post.
If it means taking the case off to find the capstan wheel, I can do that.
There is a repair shop but it is a 100 mile round trip to go there and I would rather do it myself, than to tr |
04-10-2009 | Viewsonic N4060w | Hello everyone... I've been having issues with my Viewsonic N4060w as of late. Whenever I try turning the power on my LCD it doesn't want to come on unless I hold it down. However, when I tried holding the button down it keeps flicking on & off. Durin |
04-10-2009 | | Thanks everybody. I'll keep you updated. My roommate is an electrical engineer, so if worst comes to worst I'm hoping if I show him the service manual he'll have what he needs.
Thanks again! |
04-10-2009 | | [quote:339f65994c="vtech"]If you do have any document (including Credit card Rct.) that shows the date of purchase, it is a valid document for warranty purposes. Only thing is it has to be an authorized dealer and I believe Circuit City was--regardless if |
05-10-2009 | | I show its a VZ5 chassis but can't find any info... |
05-10-2009 | | A vertical line is the bottom buffer board. The tech will probably disconnect the ribbon cable and clean the contacts. This may or may not fix it. |
05-10-2009 | Thanks for the very product specific help. | I certainly did not expect someone would post a pic of my unit, yes it looks 100% identical except for the colour of the ribbon cables.
I suspected my caps were OK but only after I read about the glue. The fuse is intact BTW.
Why are smoothing caps gl |
05-10-2009 | Cheaper Cheaper? | I'm not so sure this is as easily explained as it might at first seem.
Consider the massive increases in new vehicle warranties which can only reflect a very genuine increase in vehicle build quality whilst relative prices have fallen.
Is the vehicle (c |
05-10-2009 | | try chsinteractive.co.uk |
05-10-2009 | regarding tv memory programer | How do i fill the eprom of 24co2 to 24c32memory ics used for tvs and dvds,can any body can explain with circuit and sofware, i have computer of p4 .
thanks & regards
sameer saraf. |
05-10-2009 | Thomson 32WS65UD flyback lines and light picture | Hi, got this Thomson 32ws65ud in with flyback lines and a light picture, screen volts can be turned down to give a good picture, but on switch off dont have any dot supression, suspect LOPTX. Any one else had this problem. Cheers John |
05-10-2009 | Sony HCD-RXD6AV Question | I am trying to find the belt numbers for the tape drives on a Sony HCD-RXD6AV home stereo system. I have the service manual but for some reason there is no info on the drive belts for the tape decks. I found a site where I can order the belts but they lis |
05-10-2009 | Sony HCD-RXD6AV Tape Deck Belt info | I am trying to find the belt numbers for the tape drives on a Sony HCD-RXD6AV home stereo system. I have the service manual but for some reason there is no info on the drive belts for the tape decks. I found a site where I can order the belts but they lis |
05-10-2009 | Mita DC-4090 Owner's Manual Needed | I bought a [b:263136639e]Mita [/b:263136639e](now Kyocera) [b:263136639e]DC-4090 [/b:263136639e]copy machine at an estate sale auction several weeks ago. It appears to work, but is out of toner. I am [b:263136639e]seeking[/b:263136639e] the [b:263136639e] |
05-10-2009 | | See if this service bulletin helps you in any way:
http://www.schematics.me/downloads/sb_uk_au01302.pdf |
05-10-2009 | | Boggs
Those are the same part numbers that I had found. This bulletin does eliminate the 403 as it's for a different machine. I'm thinking the first two listed, the 400 and 401, are the two I need but I really need a parts breakdown with the picture of t |