|01-04-2009||SA 410 Technic reveiver||Hi everybody
I have an old but very good SA 410 Technics receiver which was working well since last time I used it (few weeks ago)!!!!!!!
Now ,no output sound at all.....There is a short sequence when powered up : first preheat light comes ON and then|
|01-04-2009||Technics SA 410||Does somebody has a service manual for a Technics SA 410 receiver,please?
I have a problem with a relay not energized after preheat time....
Thanks in advance and have a good day
|01-04-2009||Intel CPU uCode Loading error||Hi everybody!
i have a computer with an error when i start it ( Intel CPU uCode Loading error ) press F1 to Continue.
my computer has Asus P5P800S,processor intel 3Go with 1Go Ram/80Go HDD.
i hope to find the answer as soon as possible.
|02-04-2009||Yes, REMOTE control works fine
[quote:dbe2df07c3="jts1957"]Volume control work with REMOTE?[/quote:dbe2df07c3]|
|02-04-2009||Re: Yes, with remote everythig is OK||Well if CD, Tape and Volume all work O.K. with the remote, that's one option. The other would be those switches on the deck are defective.|
|02-04-2009||Re: Yes, with remote everythig is OK||The answer 'Yes' was only for volume control from remote control. The other things are dead i.e. CD could not be ejected or changed, tapes wont start. Only thing that works fine is Radio, Amplifier and AUX function. When power up unit looks like making te|
|02-04-2009||Passowrd for Xerox Workcentre 5665||I need the password for service mode in a Xerox Workcentre 5665. Thanks|
|02-04-2009||help please||I saw your other post where you used two universal power suppllies. my question is on connector 2, pin 4 "stb" what did you hook that to? the 5V or the ground?
thanks. any other help you can give me would be greatly appreciated. I have some el|
|02-04-2009||Electronics Repair Shop||Nyco Systems performs repair and servicing of Industrial Electronics for thousands of companies from all over World. We service Industries such as Manufacturing, Aerospace, Food Processing, and Pharmaceutical Companies just to name a few. Nyco Systems cus|
|02-04-2009||Electronics Tech Wanted||If you are an electronics tech with over ten years of component level repair experience and are located in the Los Angeles, California area please send us your resume to firstname.lastname@example.org we are always looking for qualified techs. DO NOT FAX YOUR RESU|
|02-04-2009||Amplifiers Sanyo JA6155 rtesistors R718||Amplifier Sanyo JA6155.
The end of power transistors.
Damaged resistors /burned/
R716/816 ? /1,5K/
R717/817 ? /2,7K/
R718/818 ? / The first number 3 / orange /
What is the correct resistance?|
|02-04-2009||Dynacord Powermate 1000||Hi, everybody!
Where can i found a schematic of Dynacord Powermate 1000 ?
Thank in advance!|