Date | Header | Text |
06-07-2008 | | Is it one of those two long PWB at the bottom with part #6871QRH043A?
And it's connected to the control board, right? |
06-07-2008 | | Yes. |
06-07-2008 | Sanyo TV CE21FV6 Service Mode | Using remote control.
Service Mode: Push Menu key, then type 2011.
Hotel Mode: Push Menu key, then type 1229. |
06-07-2008 | jvc hv-53pro alignment | What are the Convergence IC's and how do I replace them? |
06-07-2008 | | STK392-XXX's, usually in JVC STK392-110's. Their 18 pin multi-amp IC's. They solder in and out. The forum has the schematic for this set. |
07-07-2008 | C5929 replacement/substitute | good day people!
i tried c5129 for replacement of c5929 but its not working, can anyone help me regarding this one!! thanks |
07-07-2008 | | Since my first post, I fixed the problem without needing a service manual. I have since repaired four P35's with the same exact issue. If anyone else has a similar problem with a Toshiba P30 or P35 series (fix maybe applicable to other models), let me k |
07-07-2008 | jvc hv-53pro | Any idea where the schematic is in the forum? I looked through 20 or so pages and could not find it. |
07-07-2008 | Re: C5929 replacement/substitute | [quote:cf610d5d71="jhongski"]good day people!
i tried c5129 for replacement of c5929 but its not working, can anyone help me regarding this one!! thanks[/quote:cf610d5d71]
If you look up the 2SC5129 specs, it is very close & no reason why it sh |
07-07-2008 | DC to AC inverter for pure sine wave | thanks for your advice.
I've searched at local shop and found out that the inverter can not be used for driving a motor load. why?
I'm looking the inverter just because I have an ac motor where I want to give the power from acid battery not from ac powe |
07-07-2008 | Re: jvc hv-53pro | [quote:51f5962bd4="jkeisert"]Any idea where the schematic is in the forum? I looked through 20 or so pages and could not find it.[/quote:51f5962bd4]
search service manuals database
It's next to Forum Archives. Input the model and it will give you t |
07-07-2008 | | Usually, it should not be a problem connecting a motor to an inverter. Maybe that particular inverter design has problems with voltage or frequency regulation when connecting a "live" load as a motor with inertia to it, or maybe it cannot supply |
07-07-2008 | SA-AK230 panasonic hi fi | cd says NO DISC.
will load disc and store but wont play?
please help |
07-07-2008 | Samsung HCL473W won't turn on | Hi, I have a Samsung HCL473W TV that will not turn on. Initially the timer light would cycle on and off and stay lit for about 5 minutes at a time. Now the timer light does not even come on.
Anyone out there with a guess as to the possible issue?
Th |
07-07-2008 | Samsung HCL473W won't turn on | Hi, I have a Samsung HCL473W TV that will not turn on. Initially the timer light would cycle on and off and stay lit for about 5 minutes at a time. Now the timer light does not even come on.
Anyone out there with a guess as to the possible issue?
Th |
07-07-2008 | Samsung HCL473W won't turn on | Sorry, posted in the wrong forum. Have reposted in the repairs forum |
07-07-2008 | Renault megane scenic radio 22DC278/62P | I need code for my radio - Renault megane scenic radio 22DC278/62P because my radio is dead . pleas help me!!!
22dc278/62P
TOS342
RN 278F20107277
82001520346 |
07-07-2008 | Switch Mode PSU | hi there, i have a 24 volt switching power supply that has fried its quad opamp "LM324N" i did replace the chip but it still got fried, i measured the output of the psu and it was over voltage by 200% "70-75 volts" i did check some par |
07-07-2008 | | well i put a new ysus board and a new zsus board in and still the same thing, when i turn it on i get a few weird colors here and there, than once it warms a min and its suppose to be a picture, it flashes bright yellow and white messed up snow for a sec |
07-07-2008 | SONY HDC-VX77 SERVICE MANUAL | HI EVERY ONE PLZ HELP NEED SERVICE MANUAL FOR HDC-VX77 |