|18-02-2013||tv service mode||please send me some one wharfedale crt tv service mode|
|18-02-2013||Mackie SRM450, signal and peak led on, no output. Fixed.||Hiya
Just repaired a Mackie SRM450 with thermal and signal indicators always on. R282 and R283 10 Ohms 0.5 Watt metal oxide resistors were open circuit. I replaced them and powered up with a Variac while checking Voltage drop across them did not stray to|
|18-02-2013||whirlpool manuals||I have repairmanuals whirlpool ADP4540 and ADP4920 from
|19-02-2013||samsung p2770||i have the above tv and the problem is that the when i press menu is in strange letters not language but not understanding letters any help?|
|19-02-2013||Service manuals for a Sony BDP-S360||Good afternoon
I was wondering if anyone might me able to help me with a service manual for a ssony BDP s360 as my blu-ray comes up with sys err after it did a update over internet and had a power cut.
|19-02-2013||Firmware problem with a Sony BDP-S360 Blu-Ray player||Good evening
I am really in need of some help on this please as i started this progect over two weeks ago and dont have much hair left. I got given this and thought i would have a tincker with it, i have not done a lot of repairs on eqiptment but thou|
|20-02-2013||Not familiar with your unit but from what I remember with older units, when/if you encountered such a problem, it usually meant that your eprom data had been corrupted. It usually required an eprom replacement and there was no way to revert back.
|20-02-2013||Technics SU8044 sounds fuzzy||Dear Friends,
I am having a problem with the above mentioned amp. When I increase the volume from 0 to a quarter level the sound is OK. If I increase the level above quarter onwards , the sound becomes fuzzy and distorted. I have tried replacing the 2 |
|20-02-2013||technika lcd tv model x23/50e backup firmware||sir i want backup eeprom of technika x23/50e lcd tv my tv flash erase|
|20-02-2013||sanyo ce32fd90-b lcd tv please||ive repaired swollen caps in powersupply ok for dead fault but tv wont tune??,|
|20-02-2013||:||I just want to thank you very much jts1957 for the manual. I will see if i can get it going.
|21-02-2013||Try an aerial?|