|20-01-2012||request for an HARMON KARDON AVR25 MK2 SERVICE MANUAL||SIR;
I HAVE A HARMON KARDON AVR 25 MK2 AMPLIFIER AND IT;S CENTER CHANEL IS NOT WORKING SOME RESISTORS HAVE BURNT IN IT AND AI DON;T KNOW THE EXACT VALUE OF THE RESISTORS SO I REQUEST U KINDLY PLZ SEND ME THE SERVICE MANUAL I WILL BE VERY MUCH TH|
|20-01-2012||vanguy, the IBM 9068 Multi-Purpose Passbook Printer Service and Training Guide is available again at http://www.schematics.me/index.php?id=IBM
Here's a snapshot:
I am not sure if / how i|
|20-01-2012||Patrick25, I checked the service manual for you and found out that the "Service Program Test" chapter is not in the manual (even though it is listed in TOC (Table Of Contents) on page 1. So for some reason Philips did not include it in this manu|
|20-01-2012||You can get the Harman Kardon AVR25 MKII service manual at www.schematics.me
|20-01-2012||IBM 9068-A01/A03 Multi-Purpose Passbook Printer Service and Training Guide is available again at http://www.schematics.me/index.php?id=IBM
Here's a snapshot:
|20-01-2012||[quote:595bbc12dd="vtech"]Sounds like a device manufactured by ST micro?
Have you tried contacting them? While it is not shown on their site, there are many others. Sometimes it may be a device manufactured for another name brand equipment or simply some|
|20-01-2012||I called ST Micro. It's not anywhere in their computer system. She said it must have been obsoleted many years ago.
I think I'll try to sub an IRG4BC30U. The specs are similar
for IR vs ST:
Vce is 600V vs. 500V
Ic 23A vs. 20 at 25C
Pd 100W b|
|20-01-2012||Forgot to mention:
IBM 9068-A01/03 Passbook Printer user manual (operating guide) is included with the service manual at http://www.schematics.me
|20-01-2012||service manual for 5760/5790 xerox||Please help,
I need service manual for 5760/5790 xerox|
Listed three time on the two pages...
|20-01-2012||Strange stuff||I logged in just fine but then some thing strange happens when I click the link, its takes me to a logon screen but will not let me log in. I logged off and tried again with no joy.|
|20-01-2012||Figured this out?||I may have just figured this out. Was looking in the annoucements and found the link to the fileshare site, is this where I need to upload my file's? Not that it's not already on the site but if not maybe in the welcome email instruction on registering fo|
|21-01-2012||The manual would be very helpful.||I need this manual too. Please e-mail me to firstname.lastname@example.org if you have it. I would very much appreciate if you'd send it to me.|
|21-01-2012||Pick your poison ...
|21-01-2012||Hitachi 65SWX20B power, sound but no picture!||hi all,
i have the tv listed in the title and it suddenly stopped showing a picture. the power still comes on and sound emanates...however, no image whatsoever. does anyone please have any insight as to potential repairs? if so, please let me know and|
|21-01-2012||Looks like a pretty solid device. The turnon/off ratings are in the nanosecond region and very stable.
If there is no issue with the winding, it should be more than adequate.
More that likely it was made & stamped specifically for another OEM suppl|
|21-01-2012||sem audo||Good morning, Messrs..
I had the same problem that was solved by changing the ci513 njm7113 card volume and 2 resistrores r503 and r504 of 4R7. :P|
|21-01-2012||Me to boot :?
Your post is marked as spam. Your ip and proxy ip are blacklisted.
If you feel this is not right, please, contact support et eserviceinfo.com with spam report id 412707
Give as detailed information as possible.
unlock me pleas..|
|21-01-2012||come hai risolto il problema?|
|22-01-2012||BenQ FP547 15" BLACK SCREEN||hello everyone.
trying to found the problem in the Q5x3 power board of my benq FP547 monitor.
the problem started with black screen every few minutes . but soon become black permanent.
conecting to power and a signal, giving a green light (recogni|
|22-01-2012||Replace FP751 and resolder all terminals of T751 & T752.|
|22-01-2012||Thanks for the info. I see you are posting from Brazil too.
Curious as to where did you purchase the NJU7313AL?|
|22-01-2012||need to וnderstend||[quote:45baa8616c="jts1957"]Replace FP751 and resolder all terminals of T751 & T752.[/quote:45baa8616c]
thanks for your replay.
but the voltage after the fuse (pf571) is good (13.33v)...
should I replace it anyway?
|22-01-2012||more data||the BLT_on voltage :
1)when starting, (no connection to vga source)- the green light is turning on for few seconds and the voltage is 3.3v as well (and then go to 0.0v)
2)when connection to vga source- the green light is turning on permanent- volt|
|22-01-2012||more data||tanks JTS1957, I will try that.
I just found out that when starting, (no connection to vga source)- the green light is turning on for few seconds and the voltage is 3.3v as well (and then go to 0.0v). then, the back-light is turning on for few second|
|22-01-2012||SONY KV-TF21M20 .LED flashes 3 times||The set switches on then goes 2 standby when you press the channel buttons the LED flashes 3 times and it does not get out of standby mode|
|22-01-2012||SANSUI MP-32HU32 Half screen dislay||The pictuer starts from the midle up.fromthe center down is blue sometimes black.sound is ok.need advise|
|22-01-2012||SONY KV-TF21M20 .SERVICE MANUAL NEEDED. PLS HELP||HI .looked everywhere 4 this manual pls help.|