Date | Header | Text |
19-04-2008 | | I have tested all the resistors under the heat sink and all seem to 'resisting' fine. That only leave a few capacitors, but I'm unsure how to test these.
I'm gonna carry on testing some resistors around the STK's to see if they are OK. |
19-04-2008 | Help for SMPS repair | [b:90e28ceeda][i:90e28ceeda]
Need urgently Service Manual/Schematic Diagram for SMPS from OMICRON, France. Model number SP466C. It is used in a Light Source Module for Endoscopy From ACKERMANN, model Xenon 600. Any help or guidence will be highly appreci |
19-04-2008 | | Really was hoping a resistor was blown. But they all seem to have the correct ratings according to my DMM.
Capacitors around the Heatsinks dont seem swollen or burnt (apart from one which is orage and has a black dot on the top, but I think it's ment |
19-04-2008 | | Check the resistor on the flat cable from PCB to PDP module. When is resistor broken try change it. Sometimes is death IC on this cable. In this case resistor will burn again. Sometime is bad connector as well.
Tomyc |
19-04-2008 | | The cures of Phillips. The blue and green crts grow algae in them. They need to be pulled out, drained, cleaned out, and refilled. |
19-04-2008 | | Cool site but they only do Nokia. |
19-04-2008 | | I'm trying to find a print. There's one here but seems to be corrupt. You're missing your supply to the ic but with out a print I can't tell you where to look. |
19-04-2008 | Schematics | Any good places besides here to download schematics for free? |
19-04-2008 | | Got the manual etc from here.
The full model I have is SP42W5HFX/XEU |
19-04-2008 | | I dunno how helpful this is, but I've taken some images and uploaded them.
They are at -
http://i9.photobucket.com/albums/a88/DejaVuAtGesh/Photo-0042.jpg
http://i9.photobucket.com/albums/a88/DejaVuAtGesh/Photo-0043.jpg
http://i9.photobucket.com/alb |
20-04-2008 | Hitachi 53DX01B no picture or sound | My Hitachi 53DX01B has lost power, no picture or sound. I do hear a click when I power the set up. All the LED's are working on the circuit boards. On the main board in the bottom of the TV, there is a faint clicking relay sound that causes the red light |
20-04-2008 | Sony GDM-W900 schematics & service code | Looks to me the SONY GDM-FW9012_G1W.pdf
is possibly the same as the SONY GDM-W900.
It does include the schematics.
But it looks like we will need the service setup code,
because there are no pots to adjust.
Anyone have a service setup code to put the |
20-04-2008 | Re: TDA9350N2/2/0771 service mode ? | [quote:e57d006444="phil"]Chassis Seleco Formenti SPC2002
Label: SINGER Psn SL51M12X230
Processor:
TDA9350N2/2/0771
CB2566
K2J076SING
SWING01.2
I need service mode entry for DK and geometry.[/quote:e57d006444] |