Date | Header | Text |
07-11-2010 | | [quote:f9817953cd="Corbin5"]Another owner here of a N2750W with the common problem of turning itself on & off. Read through this thread twice and decided to order a used power supply board(FSP204-2F01) from eBay. Once I received it, I plugged it in |
07-11-2010 | no video output on a pioneer dv-f727 | I have a pioneer dv-f727 that i recently purchased used. They said it was tested, and when I recieved it, there was no video output on any of the available outputs. Can anybody out there point me in the right direction? I recently obtained a service manua |
07-11-2010 | thank you, Fixedit! | Your laser adjustment did the trick on my MX-D4T. Brilliant! -tr |
07-11-2010 | Vizio VX32L - no picture, no sound - which board to replace? | Hi,
I have a Vizio VX32L LCD TV. There are quite a few posts around the internet with this same problem - a loud noise, then no picture, no sound.
The power button turns the VIZIO logo on the TV from orange to white, which normally indicates " |
07-11-2010 | | This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
07-11-2010 | | Simple troubleshooting from user manual:
[b:6f3bfbcd4a]No picture.[/b:6f3bfbcd4a]
Connection is incorrect.
\ Check that cord connections are correct and that
plugs are firmly connected.
Player settings are incorrect.
\ Check that VIDEO SELECT is s |
07-11-2010 | | [b:66b2232330]Careful... you might put someone's eye out.[/b:66b2232330] Rider: Scopeless sniper with high clip/fire rate (Reference to A Christmas Story and the Red Ryder BB Gun. Also a reference to the Rakk Hive, since you can only get the gun during th |
07-11-2010 | dv-f727 no vidro output | Is the remote required for operation? I do not have it. Do I have to set up some video function through the remote/gui to get video output? thanks so much. |
07-11-2010 | | 1) Go to the link I provided.
2) Download the Owners Manual.
3) READ the Owners Manual.
4) Your questions should then be answered.
Jeez. :roll: |
08-11-2010 | | ya well i have some ideas about stocks and spares if any one need information means i am ready to explain it to you.
_____________________________________ |
08-11-2010 | Service Manual Siemens ncdr 1100...pls | I need electrical diagram for NCDR1100 Siemens ...
Thanks ... |
08-11-2010 | | Check your power supply for the correct supply voltages. This will help you decide what else is wrong. I'm trying to do this by memory but if you check the connector going from the power supply to the main board, you should find +5 V and +12V. The othe |
08-11-2010 | Samson XM410 mixer-noise w/effects on | I have a Samson XM410 mixer that produces an intermittant buzzy/scratchy noise from the speaker only when the effects switch is on. Occurs if speaker plugged into main or monitor. Any info would be helpful. |