Date | Header | Text |
12-04-2010 | | Thanks again for the replies.
One more question...
Do you have any idea where to buy this in europe?
I can only find this little beast in toshiba semicon's website...
Rui. |
12-04-2010 | Blinking optiquest monitor | I have an Optiquest VS11201,when you hook it up it blinks on then goes to black screen.Any help will be appreciated. |
12-04-2010 | Vizio 50 | Youve got three boards X,Y and Z.Its marked on the circuit boards.Unplug the boards one at a time and power the tv up.No change plug the board back up,and unplug the next one.When you have the bad board unplugged,you should get a white screen,half screen |
12-04-2010 | | Cool. I'll give it a try tonight. Thanks. |
12-04-2010 | Remote Control for LCD TV Fujitsu Computer Siemens | I have (LCD TV Fujitsu Computer Siemens ) MYRICA V23-1, S26361-K962-V170
I'm looking for the Remote Control, Mine got lost. Someone who knows where to find one or wants to sell can contact me @ ([email protected])
Thank's in advance |
12-04-2010 | Question... | Wow - this website is great.
I didn't want to make a new thread about this model so I thought I'd add to it.
About a week and a half ago my 1.5 year old V42L started having the No Picture w/ audio issue. Luckily, I purchased my TV from Wal-Mart wit |
12-04-2010 | | I found the X,Y and Z boards and disconnected them one at a time. No change. When you say disconnect them, do you mean isolate them completely from all connections? Thats what I did. I disconnected all plugs on the board except for the leads (tape) fr |
12-04-2010 | Sony Kdl46Z4100 bad panel | I have a Sony model KDL46z4100 that is about 16 months old and the LCD assembly needs replaced. I called Sony's customer relations 3 times and finally they said they would cover the $900 of the $2,300 cost to replacet the panel.
The first question has an |
12-04-2010 | | As usual - Bad lytics depending on which power supply/Inverter board it uses:
3) 470ufd 25 volt C24; C661 & C664
or
1000ufd 16 volt C829
8) |
13-04-2010 | SOLUTION | OK. Its an adm turion laptop with a sis chipset. There is nothing wrong with the motherboard. The problem is in the chipset. The flashes mean that some of the solder balls under the sis chipset is damaged. The solution is very simple. If you have a hot ai |
13-04-2010 | MONITOR | hi,
did you try to connect it to an external monitor via the vga output.
if it works on the external monitor that its probably the invertor or less likely the display itself.
if it doesnt work on the external monitor that it can be lots of things inc |
13-04-2010 | SOLUTION | you can try resoldering the pins. if it doesnt recognize the pen drive at all its usualy the crystal an if it cant read it its the memory which you can not replace. Anyway its not worth repairing. |
13-04-2010 | flat cable | You can try to take the display apart and make sure that the flat cable on the back of the display is in place and also check if the conector on the motherboard in ok. take it out put it back in and see if it makes a difrence. If the display is faulty you |
13-04-2010 | SOLUTION | OK. Its an adm turion laptop with a sis chipset. There is nothing wrong with the motherboard. The problem is in the chipset. The flashes mean that some of the solder balls under the sis chipset is damaged. The solution is very simple. If you have a hot ai |
13-04-2010 | bla bla | OK. Its an adm turion laptop with a sis chipset. There is nothing wrong with the motherboard. The problem is in the chipset. The flashes mean that some of the solder balls under the sis chipset is damaged. The solution is very simple. If you have a hot ai |
13-04-2010 | SOLUTION | OK. Its an amd turion laptop with a sis chipset. There is nothing wrong with the motherboard. The problem is in the chipset. The flashes mean that some of the solder balls under the sis chipset is damaged. The solution is very simple. If you have a hot ai |
13-04-2010 | | I see this was a few months ago, but any luck with that capacitor? I have the same television and am seeing the exact same issue.
I've got some electronics/soldering experience but nothing with televisions. Is the recommended capacitor the large 20 |
13-04-2010 | | This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
13-04-2010 | | Open it and look for buldged or leaking capacitors in the power supply circuit. Replace any that look damaged, and possibly any around the area of affected capacitors. |
13-04-2010 | | Problem is isolated to inverter control circuit. |
13-04-2010 | | This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |