|22-05-2008||Matsuir DVDR100 firmware||I am experiencing problems with a Matsui DVDR100, it will not eject a disk if it is in the machine when the power is turned off.
I have tried a different dvdr in this unit as it is an IDE interface and get the same problem so have come to the conclusio|
|22-05-2008||Optiquest (Viewsonic) Q7||I'm looking a Optiquest Q7 LCD monitor schematic. The numbers on the mainboard are: 790391200600, WB4BR, these are written on the component side.
The following numbers are on a bar code on the circuit side:
The problem is|
|22-05-2008||Yesterday I had a Samsung plasma that after it was on for about 10 minute would get red horizontal lines near the top right corner. I replaced the y sustain and logic board. Theory, the y sustain does the majority of the video processing and is located on|
|22-05-2008||DVD tray not working||My son has a Toshiba TV with an integrated DVD player. The tray will no longer open (with a DVD stuck in it) and if he hits PLAY pr TV/DVD, the picture is garbled, kind of bent and rolling vertically in multiple bars.
So, I opened up the TV hoping to |
|22-05-2008||pioneer car stereo DEH-M6106ZH||needs help for the service manual of Pioneer Car Stereo DEH-M6106ZH from HONDA CIVIC HK51 UPG.|
|22-05-2008||Clarion car stereo PH-1151L||Service manual for Clarion car stereo PH-1551L|
|22-05-2008||I would do anything for a schematic diagram or circuit diagram for the persario v2000 laptop, Motherboard 373523-001
Waiting in anticipation
|22-05-2008||Just an update for anyone searching the web and finding this post. I have a Mitsubishi HS-u70 (except, because it's from Canada, it's labeled and Electrohome AVR G95 ), that had a problem playing SVHS tapes.
The machine played VHS tapes just fine, but|
Shows the IC board in the main board, and the capacitor in it's hiding spot.|
|22-05-2008||thanks||[size=18:1af38cf7bb][/size:1af38cf7bb]thanks alot to all who answered me.i want to add that buttons of the main panel work well .any why i will try all possible solutions.Thanks again. :)|
|22-05-2008||Whoa. Excellent information, much of it over my head but I think I get most of it.
I'd like to try to remove the power board from the equation first. I should "look on the panel it will give you the VS and VA voltages that supply the sustain boar|
|22-05-2008||need sustitute of la47201p||i need sustitute of la47201p or its diagram.any one to help me with this.thanks in advance.|
|22-05-2008||Sharp VL-Z1 cassette not loading||I recently spilled weed killer into the camcorder. Yuck. It took about an hour to get the tape out. I cut the tape with a scalpel and turned it off/on with some shaking to finally get it to eject the tape. This was after 12 hours in front of a fan with th|