Date | Header | Text |
27-02-2007 | need service manuals for Panasonic kx-a144exs | need service manuals for Panasonic kx-a144exs |
27-02-2007 | D351 Samsung LCD issue. | Hi,
Got exactly the same with mine, open it and find the ribbon cable broken further to open/close function of the screen......... but only after 9 months!
Unfortunately, it was a gift from family and I don't have the prove of purchase to play with |
27-02-2007 | | if the standby light flashes when you press a button on the remote try this trick, press down button on the set and the "i" button on the remote simultaneously, this should bring up "self check" on the screen , wait 10 secs turn set of |
27-02-2007 | | [quote:63137b54ad="minnie"]I use this site,
http://www.repairclinic.com/0001.asp[/quote:63137b54ad]
hi there thanks. i will try this link ,cheers |
27-02-2007 | Matsui r100 dvd recorder | :( Hi please help. I have the above mentioned dvd recorder with a problem with the psu. r24 is burnt out and i have suffered a loss of power to some components. I am assuming that i have lost one or two of the varied output voltages. As some components s |
27-02-2007 | Data recovery problem | I posted last week about my computer (15" pbook g4 1.33 GHz) crashing. I called Mac outfitters today to see how the repairs/stauts was on my machine. They said that the hard drive needs replaced as well as the optical drive (I just had a new optical |
27-02-2007 | Hitachi C2989FS CTV | My Hitachi 29"CTV blew on low voltage mains supply. Power dropped from normal 240Vac to about 80Vac and blew a few components in primary and secondary supply cct.(uses SMPS).
Repaced all blown components ie Q902-BD329, Q901-KTA1266Y, Q903-ON4959, |
27-02-2007 | | if the convergence wont perform perfect focus you probably need to replace 2 convergence ics.stk394-040. and also check all 3,9 ohm resistors nearby. and lastly you have to check 3.5 amp pico fuses under heatsinks(hidden). then push perfect focus.should f |
27-02-2007 | "Philips VR 512/02" VCR makes no longplay. | Please help me.
I just repaired a German Philips VR512/02 hifi video recorder (bought on eBay); it now mechanically works well and everything behaves correct, but it makes no longplay.
It completely ignores pressing the "SP/LP" button (on |
27-02-2007 | Panasonic Manual | Hi
I Have This Manual
please E-Mail me
[email protected]
OR
Log On
http://www.service-manual-owner.com |
27-02-2007 | Philips VR6585/02 VCR:faulty hifi =>noisy picture&no | I bought on eBay a Philips VR6585/02 VCR (German version). I got it mechanically to work, but there are plenty of white stripes and noisy snow in the picture and it does not play hifi stereo audio from cassette. (The "HIFI" icon stays off during |
27-02-2007 | | Guess I'll never more bother with this TV. I got the back off, cleaned everything around the HV circuits, got out the deflection board, reseated all "daughter" boards (the TV is "modular" coneption) also the flyback, resoldered everyth |
27-02-2007 | aiwa | Hello i think that the problem was dead fuse resistor on the board Green color
Sorry but i cant remember well |
27-02-2007 | LM 2412 | Hello can anyone inform me from where can i get this IC (lm 2412) |
27-02-2007 | Repairing Laptop Ac Power Cord. | [img:b805488980]http://img.photobucket.com/albums/v395/Gats2k6/100_00951.jpg[/img:b805488980]
This cord still technically works, It is detoriating in reliabilty. I have to bend and/or wiggle it to work. How it got to so this state I do not know. The re |
27-02-2007 | | Hello again
Fuses have been changed, and I was able to adjust all the colours
Whilst in the service menu and adjusting and adjusting the set just went off.
Turned it back on as I thought I hit a button, then I could no longer adjust the blue.
Went off |
27-02-2007 | Re: Philips FSQ Vision - Tuning and colour problem | [quote:4e9aff2cfc="msu"]Hello,
For last two weeks or so my old Philips FSQ Vision has started forgetting tuning and colour settings. I have set a Sky box at channel 9. When I switch the TV off or put it on standby it forget its setting and every time |
27-02-2007 | Denon UPA-F10 | Hi - Has anyone got a schematic )manual) for this amplifier that they could upload,
Thanks.
Malc |
27-02-2007 | | OK
No idea what was wrong, ALL IS FINE AND WORKS AGAIN!
The problem was one of the pico fuses.
Now a lot of aligning to do, but have provisionally aligned this evening and apart from a few wonky lines (as I did not use a template or DVD)
Perfect p |
27-02-2007 | | Find a new end, cut the old end off and splice the center conductor then ground. |
27-02-2007 | | Good girl! :D |
27-02-2007 | Re: Philips FSQ Vision - Tuning and colour problem | [quote:99a8dc64b9="coiki"]
hi! i just bought an old philips FSQ vision... and i was trying to set up my universal remote control but i just can't find the code!! do you know any code that might work??[/quote:99a8dc64b9]
Are you trying to use sky/ ntl |
27-02-2007 | | How might a find a new end? Radio shack or online? Could you point me to a site online if I can't find it retail?
Thanks for the reply. |
27-02-2007 | | hi try this site for data recovery programs majorgeeks.com its worth a try :!: |
27-02-2007 | | I've had this problem myself. The wire was poorly soldered at the factory and became intermittent soon after use.
I could not find a new connector because it was unique to that manufacturer, I fixed it by using a sharp utility knife to slit the plastic |
28-02-2007 | Horizontal black lines in the enitre screen | Hi! I'm having a problem with 15" AOC 5En monitor, I hope I can find a solution it here. The problem with my monitor is that there are horizontal black lines in the entire screen area, big and small lines scrolling. I can not able to continue my work |
28-02-2007 | problems with my r52wh74 | I am having a very strange problem with an r52wh74. When in 1080i mode, the image is "too big". As in, it overfills the screen. It works fine over standard definition programming, and anything in 480p mode. It only seems to happen in 1080i mode. |
28-02-2007 | No one to attend this tropic | No electronics Lover |
28-02-2007 | No Readers | No readers to my site |
28-02-2007 | RCA F27242GY Dead | The power cord is giving the correct voltage, the fuse is good. What do I check or replace?. When I press the power utton it does nothing. |
28-02-2007 | NEC plasmasync 4210W | NEC Plasmasync 4210W
Hello Steve,
Well I drug it out off the closet after 2 years and it still does the same thing??
Power on. Green light on. Fan on. Right side is half screen display then split in two quarters that are scramble images. I have a pho |
28-02-2007 | Re:Data recovery problem | Yes, these places really work. They use techniques which can include the disassembly of the drive and direct examination of the drive surface. Depending on just what is necessary (it is unlikely that your drive requires anything that extreme, but hard dri |
28-02-2007 | vx/opel astra z16xe wiring diagram / ecu info | Hi
Does anyone have a wiring diagram for a Vauxhall/Opel Astra with a Z16XE engine and/or tech docs for the Multec S ECU? Thanks.
Regards
Keith |
28-02-2007 | Old TV, screen image has moved up so can't see top | Hello everyone.
I have an old BEKO TV and the problem is that the screen image has moved upwards so you can no longer see the top of the picture and where the picture should be at the bottom is all black.
I've heard this is a common problem with the |
28-02-2007 | Hitachi 55FX20B, relay box?? | I just got ahold of an 55FX20B Projection TV, manufactured in Aug. '96. The old owner said that a "relay box" needed to be replaced. I haven't a clue if he knew what he was talking about, i don't know if there are any relays in the little metal |