Date | Header | Text |
23-12-2008 | Re: what other brands ... | Some Zenith's were made by JVC. |
23-12-2008 | convergence | I have a Zenith TV, Model #PVY4665RK. The convergence does not go completely to the right edge of the screen, so the right 3 to 4" I can not get focused or the convergence set right in the area. How can i fix that . |
23-12-2008 | | I figured out it was a cap because of the C designation of the location on the board. Someone with more experience told me it was a tantalum. From all I have read I also thought the 330 was the value. At this point I agree with you vtech that I should |
23-12-2008 | | Whatever your working voltage is, go next step higher, space permitting as you indicated.
If you want to post a pix, try a place like photobucket .com & post the picture's url in the forum |
23-12-2008 | Denon DRA-01025 Repair | I have a Denon DRA-1025 stereo receiver that I have had for a long time (it's 18 years old). It's always been a great receiver, but recently we had a brown-out and since then I get no power from the unit.
There is an inline fuse before the power switc |
23-12-2008 | Panasonic RX-DT 70d Service Manual Needed | Hello,
Help Please,
I've to repair a double cassette tape mechanism of a Panasonic RX-DT
70D "Portable Stereo Component CD System".
It would be useful to have a service manual of this device which shows
an exploded view of the Syste |
23-12-2008 | KR A 5040 | Try transitioning or cleaning the 4ohm 8ohm slide switch at rear left side and adjust to your speaker resistance. |
23-12-2008 | | Well a non working unit, or non working anything for that matter, checking the fuses is the right thing to do if 'totally dead', the next thing is to check around the power supply and any regulators foe voltages and for this you'll need a meter of some de |
23-12-2008 | | First of all cleaning the laser lens won't cure the no-tape run situation, I would check and see if the tape belst are intact and that the tape capstan is running, I'm thinking if the belt/s have come off it may just be enough to confuse the logic to the |
23-12-2008 | yamaha B100-115 | necesito urgente el manual de servicio del amplificador B100-115 si alguien me puede ayudar se lo agradeceria mucho |
23-12-2008 | | Here's the inspiron 1150 service manual:
http://support.dell.com/support/edocs/systems/ins1150/sm/keyboard.htm |
23-12-2008 | Re: UD-M50 trays | [quote="rgutierrez"][quote:af4ab7a477="Ibbotsnm"]PS.
Forgot to mention, I can let you have a copy of the relevant repair manual instructions if you indicate your Email address.
Regards
Ibbotsnm[/quote:af4ab7a477]
could you also send me |
23-12-2008 | Help. what's compatiable | I have a 2000 Explorer and just bought it used. the stereo was missing and the man at the car dealership pulled a YL2F18C868CA from something else and slid it in. However, the back of the stereo has 3 plugs and my truck only has one wiring harness to plug |
23-12-2008 | WAVETEK 144 SWEEPER MANUAL AND HELP FOR REPAIR | Hello , I am searching the full repair manual for the WAVETEK 144 sweeper
please help and send to [email protected]
also if hints : the sweep generator don't work the normal generator is ok , but no sweep .
thx for help , >benja |
24-12-2008 | hello | on mine R133 also blew appart. Q125 shorted.
Cand se anything else.
Did you managed to repair youre board? |
24-12-2008 | Thoughts on sony bravia KLV-S40A10 - power issues - advice | I've done afew repairs in the past to random stuff like motherboards, sound systems and lcd monitors but not really a expericenced repair man and generally the repairs are done by inspection and spotting the obvious bad parts such as bad caps and shorted |
24-12-2008 | | Thanks Dave, that's a good idea. I do have a voltmeter, so I will plug it in and see what is getting power with that. Maybe I can find out the bad component that way. It's worth a try and even though I have little experience with this, it may help to k |
24-12-2008 | Re: Denon DRA-01025 Repair | Any lights or clicks? Or does unit "work the same whether plugged in or not." (Completely Dead?)
If unit has a standby power board the primary of that transformer sometimes opens.
Check plug-in connections for labels that can clue you in to va |
24-12-2008 | I need Sony HCD-F3MD service manual. | I found Sony-F3MD service manual on eserviceinfo.com but i can't download it. May someone help me to download it or if you have it, plz upload it to mediafire. Thank you so much. |
24-12-2008 | Re: Stand by | 5 volt stand by should be there "all time set is plugged in."
Is it there (at 5 volts) UNTIL set is "turned on," or does it start clicking, flashing, etc. as soon as plugged in (without having to hit the "POWER" button)? |
24-12-2008 | Re: Service Manual | Try:
https://www.manualzone.com/MainSearch.do?brand=415&model=B100-115&elementChanged=Find |
24-12-2008 | Re: Zenith TV, Model #PVY4665RK | ???Take it to one of the few remaining repair shops in your area??? |