|21-01-2008||RGB Misgalignment on Toshiba TheaterView 50"||Hello,
I have a Toshiba 50" TheaterView TV, and I believe it is rear projection. I bought it off of a friend of mine for a few bucks, and the only problem with the TV is that the red, green, and blue layers are misaligned slightly. The green is |
|21-01-2008||Tried to edit, but it doesn't look like that feature is available.
Anyways, I played with Convergence a little bit and it seems like maybe just the blue layer is messed up -- it is jittering and it is offset to the right.
Thank you in advance!!|
|21-01-2008||Philips TP3284C blinking power light||I was given a TV which had the power cord cut off. I replaced the cord and now TV clicks when power button is pushed, light continually blinks, but no picture. If anyone has a service manual or any suggestions, thanks in advance. I was thinking it was pro|
|21-01-2008||delete this topic -- reposted in proper forum. my apologies... (damned firefox tabs)|
|21-01-2008||RGB Misgalignment on Toshiba TheaterView 50"||Hello,
I have a Toshiba 50" TheaterView TV, and I believe it is rear projection. I bought it off of a friend of mine for a few bucks, and the only problem with the TV is that the blue layer seems to be jittering and offset to the right of the othe|
|21-01-2008||Thanks for the help minnie. Just to summarize for anyone who should come across this thread:
I think what happened was jumper 010 had a bad solder joint, causing the fuses to blow. Unaware of the bad solder joint at the time, I replaced the fuses and t|
|21-01-2008||owners/srvice manual hyundai lcd tv model ltv321||hi can anyone out there let me know where we could get a service manual or info for the above lcd lost the power cord and manual during moving and now cannot operate...thanks|
|21-01-2008||The picture must be either posted somwhere on the net or else you can upload your own to any of the free sites. use the "img" tag with the corresponding url of where the image is located.
as an example here is the im|
|21-01-2008||Need Schematic for RCA R29SF0BA||Circuit diag or chassis No. TV has raster, retrace lines, no pic. Some res heat faded, need values.|
|21-01-2008||It is basically an inherent problem in some amplifier designs (as in a STK) where it is depending on seeing a balanced rail voltage.
if/when there is a mismatch on either voltage rails &/or load, upon powering up, it will quickly cause a no-control &|
|21-01-2008||currently rolling over :oops:|
|21-01-2008||philips combi tv-vcr||have a problem with a philips tv-vcr combi,chassis mono98
the ptc is broken,type T209 9825???
i can t find any information about it?
can i change it for an other one????|
|21-01-2008||That 2-pin appliance plug
is commonly used on class II (reinforced insulation) equipment that does not need protective ground. However, a ordinary grounded mains cable with a|
|21-01-2008||replace the str|
|21-01-2008||Palsonic 5139 green down sides||Hi. I have a Palsonic 5139 Tv (Australia from K-Mart). There is a problem where the colours down each side are green. The middle section of the screen is OK.
I don't have a service manual or a circuit diagram. I am not sure if Palsonic are still in busi|
|21-01-2008||Sony CTV KV-2966AS||Sony CTV was squealing, replaced flyback tx, now the sets no go at all.
I have no schmatic and the circuit is filled with dust which is making it
difficult to service. Any suggestions to get it running?|
|21-01-2008||thomson rp52 uk||i,ve had this tv for about 6 months but now the picture is very ghostly i think its the convergence and when i turned it on the other day i have a message now at the top of the screen saying V3150 TNPZ7I
PLZ ANY HELP WILL BE VERY GRATEFUL|
|21-01-2008||Re: SERVICE MANUAL TV SONY KV29XL70E||[quote:272a529983="aaaa"][quote:272a529983="stefafog"]I need technical manual to enter in service mode for TV Sony KV29-XL70E by the remote control RM 344.
Thankyou very much.[/quote:272a529983][/quote:272a529983]
htoo htoo-I need technical manua|
|21-01-2008||Service Manual Lanier 5555||I need a service manul for my lanier 5555 copier.
|21-01-2008||Hi, sorry it's difficult to explain. Imagine an IEC extension lead - the female end contains the pins. The socket on the sewing machine is like this (or like the back of a monitor) but accepts a flat euro plug design rather than an iec design...
|21-01-2008||Maybe that is a special plug designed by that particular sewing machine manufacturer, in the past there were many non-standard plugs in that business.
What brand is the sewing machine?|
|21-01-2008||If it is a conventional CRT tv and the discoloration is there also when viewing a monochrome picture (turn down the color saturation or view a noise picture), then it is a color purity problem.
It might have been caused by a strong magnetic field near |
|21-01-2008||RCA Scenium DLP||We have a 50 inch RCA Scenium DLP that is approx 2 years old. The lamp has gone out ( according to the trouble shooting guide in the manuel). We have no picture but we do have sound. We have purchased three lamps and we still have the same problem. We|
|21-01-2008||SO got it the other day but something got me confused...With camrea I got a 2 dc adapter (both 9v)one for receiver and one for cam.It also came with a adater for a 9v to plug in to the cam but in the book it says do not use any thing but the dc adapter.Do|
|21-01-2008||Sorry the adapters are 8v|
|21-01-2008||Have you tried the ballast?|
|21-01-2008||Without knowing the model # the convergence IC that controls the blue has failed. Normally there STK392-110's. Replace both of them and you should be fine. Also check the resistors around them 6 total.|
|21-01-2008||Start by replacing Cap 2814 with 100uf/10V.|
|21-01-2008||Provided that both are designed for DC voltage(as they appear to be but check the sticker to be sure).
As long as [b:16da5cf608]DC voltage rating[/b:16da5cf608] and [b:16da5cf608]polarity[/b:16da5cf608] are observed, there is no problem using a batter|
|21-01-2008||bose corvette||You've got the rotten filter syndrome, (leaky electrolytic capacitors) hopefully it will be repairable if the corrosion has not gone too far, if you are going to fix the radio then go up to the end and change the caps on the speakers too before they get |
|21-01-2008||SONY KV29FX20E. LED BLINKING TWICE||hello can you help me with this fail? thanks.
i think that its the fe1a chassis, when try to start the tv, we have only blinking led twice. i test the horizontal driver transistor and its shorcircuit, i changed it and the trt put again in s/c. can be t|
|21-01-2008||This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from:
22mb, 1192 Pages
|22-01-2008||It's a Necchi Lelia. I think I'll fit a new plug...|
|22-01-2008||Re: SONY KV29FX20E. LED BLINKING TWICE||[quote="taban"]hello can you help me with this fail? thanks.
i think that its the fe1a chassis, when try to start the tv, we have only blinking led twice. i test the horizontal driver transistor and its shorcircuit, i changed it and the trt p|
|22-01-2008||Sourcing a TI chip||Hello everyone.
I have an 8 lead chip from Texas Instruments that I'm having trouble finding. It clearly has the TI sm on it. Top line reads 2024, second line is 5BM, and the third line is C490.
It is suspect in a USB bus issue, and I'd love to s|
|22-01-2008||mitsubishi 60" tv vs-6041||Hi everybody, this tv shows the picture as bright red and blue, lower green, no white and a lot of black. I initially thought the luminance signal was missing and replaced the cxa1545as near the av/svideo i/p. Green seems stronger and picture clearer, bu|
|22-01-2008||Yeah the model # is TZ-55V61. I had read somewhere else that I should be looking at part Stk392-110.
Thank you very much for your information!!!! Hopefully I'll be able to get this fixed up.
Do you happen to know where I might be able to locate a s|
|22-01-2008||Service Manual for Toshiba TheaterView TZ 55V61||Hello All,
Does anyone know how I might locate the service manual for this TV? I tried searching around to no avail, and I'm wondering if the manual even exists! Haha...
Anyways, any help is very much appreciated!
|22-01-2008||HK avr 225 receiver front display not working||i was using the harmon kardon avr 225 receiver and the front panel went out. Radio does not come on, and there seems to be no activity, other than the power light comes on, standby works, and I can see the outside front panel that shows prologic, vd1, sur|
|22-01-2008||Chi Flat Iron Fuse?||My wife has a $100 flat iron and it keeps changing heats on its own. On one of the ceramic pad there is a white rectangle component mounted by a clip. It has 2 wires runing out of it that are running to 2 screws on the pcb that are marke as fuse. This |
|22-01-2008||Based on your description, sounds like a thermal fuse? More than likely it is not where the problem is and may be the heating element or a connection issue?
Btw, found a safety recall which may or may not be what you have?