|22-02-2007||CLEAN JOINT AREA WITH A FIBRE PEN, AVAILABLE FROM GOOD HOBBY ELECTRONIC SHOPS, APPLY LIQUID FLUX, PREFERABLY NOT A WATER BASED ONE, AND ALL SHOULD BE WELL|
|22-02-2007||it is very common for the same display to be used in different units with different features, if there is no sleep button on the remote it is likely the feature is not available.|
|22-02-2007||matsui dvd recorder r100||Hi i've also got one of these models and am experiencing similar problems which i feel i have also narrowed down to the psu. But mine seems to have overheated and blown r24 resistor. does this resistor act as a fuse for another component and does anyone k|
|22-02-2007||Service codes for Toshiba CX35C60||Ive been to fixyourowntv.com, and with allexperts.com. Ive tried the mute on the remote and the volume down on tv using the remote #9 as well and no service mode, is there another way or just not offered with this model?|
|22-02-2007||KE32TS2E||I also have a KE32TS2E which blew the switching regulator after just 2 years. Sony have disowned it. Beware !!! never nuy Sony plasmas their crap. :cry:|
|22-02-2007||Hitachi C32W510SN No Colour on Start-up||On switch on there is no colour and what appears to be poor quality picture. Switching on and off several times will invariably overcome the problem and bring back a perfect picture. It now switches to standby after about an hour but only when on program|
|22-02-2007||Thinkpad T40 & T60 Maintenance Disks?||Is there someone who has a floppy image of these I can get?
I tried the download for the one that works on the T4X series and not only can I not fit it all on a floppy, it tells me some of the files are corrupt.|
|22-02-2007||TV Philips model 28pw6006 chassis l01.1e had the burnt BU450||TV Philips model 28pw6006 chassis l01.1e had the burnt BU4508DX of position 7460 substitutes it and the TV was without sound and the image with a horizontal trace close to the top. It will be that they can help me to find the problem? Thanks a lot|
|22-02-2007||I thought as well it seems pointless to put 2 regs in parallel but they are you can clearly see the track on the pcb as they are facing each other about 20mm apart. Like I said above the reg that it fitted to the one particular heatsink is the one getting|
|22-02-2007||Same Samsung, same problem||Thank the person who invented forums.
I have the same problem with mine and have just ordered 2 new IC chips.
Are they easy to replace? Would be thankful for any tips on how....
I have been quoted 180 for repairs so if I can do it myself :lol:
|22-02-2007||In the end I gave in and soldered the contacts together. Took me two hours to put the thing back together, and it's still not working. I must have fried the IC when I applied inverted polarity.
Thanks a lot for your help, I wouldn't have known where to|
|22-02-2007||error message sony cdx s2000||I have a Sony cdx s2000 The cd player will not play any cd's origionals or copies.
When the cd is inserted it just comes up with "error".
Any help you can offer would be very much appreciated.
|22-02-2007||Service manual for Sony CDX-M8800 need||Hello Forum, Does somebody have SM or schematics for this Sony model.
|22-02-2007||me too...||Same problem just occurred with my Dad's unit. Did you ever find a fix, or did it turn out to be a shorted IC? In which case, did you just get a new receiver?
|22-02-2007||I bet the guy who started this thread is sorry LOL|
|22-02-2007||probably this procedure,press mute once on remote, then twice and hold.at same time push menu on tv and you should be in.|
|23-02-2007||I'll see if I can find a service manual for you.|
|23-02-2007||OK, Thanks in advance
|23-02-2007||Press mute, hold mute 2nd time, press menu on set, S will appear, press menu on remote the the number 9 or 7.|
|23-02-2007||Replace your vertical ic and the resistor that feed the IC.|
|23-02-2007||Vertical IC is a TDA8351, and the 1 ohm resistor off the flyback.|
|23-02-2007||Sounds like your tuner is bad. Put it on video 1, feed the dvd into it, and see if at turn on color is there.|
|23-02-2007||Ok I tried to adjust the convergence. I got the blue and the green real close. But when I tried to adjust the red the screen went black half way thru and now the only sign of life it shoos is the blue power light and a thumping cumming out of the speakers|
|23-02-2007||Sony KP51HW40 CRT Tube Repairs||I have a Sony KP51HW40 projection TV that when it turns on goes to a blue screen that quickly fades to black. I'm told I need to replace the Blue CRT Tube. It's going to cost $500, which I'm willing to spend, but I'm concerned it won't match the brightn|
|23-02-2007||OK I plugged the TV back in and it looks like it reset. It still looks like junk but it is on now.
BUT on the red convergence (service menu 6.convergence) When I chang the setting on
CCA01-CCA06 nothing happens. I am going to put one of the old IC's ba|
|23-02-2007||some 1 can help me? :(
i need very much the diagram for TV Panasonic CT-27G3W
|23-02-2007||What about http://icxinyi.com/EN/? is secure site?||Hi...
The diagram for my TV Panasonic CT-27G3W is listed in http://icxinyi.com/EN/
but i don't know about that site... is secure? trustworthy?|
|23-02-2007||Re:Laptop Inspiron 8100 Hard Disk crashes?||I had similar problem. While installing Windows Vista, my HDD crashed. I tried every possible thing to get my data back. But, problem was I recreated partition table and data recovery seemed to be difficult. I contacted Salvage Data Recovery Lab at 76 Pr|
|23-02-2007||...Oh well , chalk it up to experience. These things are really not meant to be easily repaired & can be a reall PITA . Sadly in today's consumer electronic market "disposable" is the name of the game. :x|
|23-02-2007||monitor||plzz help me!!! :( my problem is no B+.hitachi 17" pc-dc3576 model.thnx|
|23-02-2007||DISTORTED PICTURE||SONY TV MODEL KV-14APV2 PICTURE IS DISTORTED. I HAVE RESOLDERED ALMOST ALL COMPONENTS BUT STILL IT WOULD NOT WORK. SOMETIME IT GOES BACK TO ITS GOOD QUALITY PICTURE BUT IT GOES BACK AGAIN. SOUND IS GOOD.|
|23-02-2007||POWER PROBLEM||I HAVE A PROBLEM WITH THIS SONY TV MODEL KV-16APR1. IT HAS NO POWER. I HAVE REPLACED THE STR. CAN YOU GIVE ME THE DIAGRAM ON THE POWER SUPPLY SECTION?|
|23-02-2007||OLD PROJECTOR||WE HAVE AN OLD SONY PROJECTOR MODEL VPH 1043QJ. HACC. MADE IN JAPAN. ITS SIZE IS LIKE AN EMPTY CASE OF BOTTLED SOFTDRINKS. THE PROBLEM IS THE THREEE SEPERATE LENSES INFRONT FOR THE COLOR RED, GREEN,AND BLUE WAS BROKEN. FLUIDS COMES OUT IN THIS LENSES. WHA|
|23-02-2007||hud25||tv hyundai hud25 to unlock press on/off & sub.page|
|23-02-2007||AUDIO PROBLEM||SONY TV MODEL KV-21GDR2 DO NOT HAVE AN AUDIO OUTPUT. REPLACED AUDIO IC BA5412 BUT IT WONT WORK....WHERE CAN I FIND DATA FOR ITS VOLTAGE OUTPUTS. IF POSSIBLE IN ENGLISH DATA....|
|23-02-2007||dont know the exact model but the sonys i work on have an auto greyscale circuit that will balance the emission of the crts so that the brightness will be the same for all 3 colours providing, a) the a1 voltages are set correctly and b) the other 2 are wi|
|23-02-2007||motherboard ASUS P5PE-VM refuse sound drivers installation||Hi to all!
My friend just changed his old motherboard with an [b:a26f2935d4]ASUS P5PE-VM [/b:a26f2935d4](that's what it says on CD). And I have installed [b:a26f2935d4]Vista x32 [/b:a26f2935d4]on a friend's PC and can't find the right audio drivers, thou|
|23-02-2007||Service manuals for Panasonic kx-a144exs||Please,
I need service manuals for Panasonic kx-a144exs
|23-02-2007||I think you have 2more problems. The horizontal trace indicates that you have a fault in vertical circuit that might be some caps faulty or vertical controler(check all semiconductors near this).
Sound problem...try to check TDA output or Speakers o/c.
|23-02-2007||I´ve check all vertical and nothing but with some resoldering now tv is stucked in standby mode with 2flashes code error (protection circuit) but driving me crazy because i can´t enter in service mode to reset tv.If someone know how...
|23-02-2007||Canon copier NP6035 user manual||Canon copier NP6035 user manual PLEASE!
|23-02-2007||solder sucker soldering iron.||YES,
the lead and pcb are burnt, corroded by being a bad connection, solder just runs off it!
Clean the Metal, scrape clean with a knife if you have to! when the metal is clean it will solder.
Tip! in desperation, if all else fails, Aluminum solder, wi|
|23-02-2007||PHILIPS TV/ DVD COMBO 14PT61071/05||I have been asked to repair this nearly new TV DVD.
The problem is that it was set to ALL REGIONS for the DVD player.
This was lost due to children playing.
Now shows wrong region for all discs except home burns.
need service menue, Data sheet , instr|
|23-02-2007||this model has a problem.you need to replace all 3 crts.and 3 resistors as well.i believe the blue crt is not available anymore.but sony had a problem with these tubes.the fix was all 3 tubes to be replaced.not cost effective.|
|23-02-2007||All The Manuals You Need!||http://fletchersite.com|