|01-11-2012||Gorenje dishwasher GSD682W-F1 datasheet/tech. specification?||I am looking for Technical Specification or Datasheet of Gorenje dishwasher model GSD682W-F1.
I am also looking for a Catalogue or a Price list for the same model, especially for part numbers and prices of the following parts:
- upper sprayer|
|02-11-2012||Circuit/Schematic Diagram notebook toshiba satellite L300||Hi guys,
i m looking for a schematic diagram for notebook toshiba satellite L300.
can someone help me ?
By Matrix Italy|
|02-11-2012||subwoofer Peerless S-150||e015I need shematic of amplifier, or values of the resistors R10, 14, 15, 19, 20 and 21, thank you|
|02-11-2012||Orion/Sansui Overscan issues / HDMI to PC||Hi, I am having major issues running my Orion/Sansui SLED 1980A TV via HDMI with my PC (I only use it as a monitor). The overscan is extremely annoying and the only way around it is to create a wacky custom res of something like 1884x1028 which I am told|
|04-11-2012||Hi have a look at this link download/open the pdf file here-:
I can't be sure if this is it, the pdf 'seem' to indicate a BCW61C, I would imagine the QR are the hfe markings, the gain of the device.
|04-11-2012||Possibly a line timebase fault, no line drive, vertical scan. A check with a test meter should put you on the right track.
|04-11-2012||It could be the pump or a fault on the control board, trying a replacement is one option to take.
Just because the motor spins freely is not saying it doesn't have a shorted turn on it's coils, may be if it uses carbon brushes they just may be worn.
|04-11-2012||LG 42PQ3000- no video/audio -flashing d201?||I found 2 fets on the z sus were short. Changed the board but still the same. Changed the Y-sus, y drv,main board but no difference.
I'm down to control board and x boards. The control board has an led D201 which flashes on start up. 4 quick followed |
|04-11-2012||Sony DAV S550 All-in-One DVD - Noisy Drive||This is an old all-in-one home cinema DVD system with a slot loading drive. Disc loading is controlled by three gears. Two that grab the disc edge & draw it in & one to stop the disc when fully loaded. They then rotate away from the disc edge to a|
|04-11-2012||It is not working for me tried several times|