Date | Header | Text |
24-04-2010 | manual | Thank you Vtech^^^^^^^^^^^^^^ |
25-04-2010 | | VGA is analog and HDMI is digital. There is no way you will get a picture with just a simple passive cable. The VGA signal has to be processed through some sort of active conversion adapter before it will work with any digital input such as HDMI. To the |
25-04-2010 | | Cheap a@@ computer. The VGA to HDMI will work if the video card supports it. The problem is there's people selling cables for everything. VGA out does not support audio. I used a 3.5mm to dual male RCA audio works fine but no picture. I'm running the gamb |
25-04-2010 | | my dear if you still in need for the manual i can send it to you
just send me your E-mail :roll: |
25-04-2010 | | Hi Im having the same trouble with an Onkyo tx sr 603 - no sound any ideas? |
25-04-2010 | | I realize this discussion is a few months old at this point, but I wanted to chime in with information that might help the next person looking.
[quote:5852d46839="vtech"]In looking at your first set of pictures, apparently those are in fact rotary enco |
25-04-2010 | | There's a kit, Deflection PWB Repair Kit X480315. It has you replace Q777 the H out, pico E947 and the heat sinks for the vertical IC and horizontal out put transistor. The main cause is the CRT's arching. I soldered up the heat sinks, and resilconed the |
25-04-2010 | | Not without a model number... |
25-04-2010 | | There's a kit, Deflection PWB Repair Kit X480315. It has you replace Q777 the H out, pico E947 and the heat sinks for the vertical IC and horizontal out put transistor. The main cause is the CRT's arching. I soldered up the heat sinks, and resilconed the |
25-04-2010 | philips 42pf5520d/10 plasma tv no pic no sound? | I have replaced the 2 caps on the 3.3V line on the powerboard but still no pic or sound? there are 4 clicks when powering on. remote works green light. |