Date | Header | Text |
16-03-2010 | | One of the wires going to the inverter board should be going high/low each time the POWER button is cycled "on/off." :wink: |
16-03-2010 | | what is considered high? and what is considered low? i have 4 volts on one wire,and 3 volts on the other when turned on. from the new power supply |
16-03-2010 | | Only 5 years too late. |
16-03-2010 | Looking for a Service Guide for a Mitsibishi XL25U | I am looking for a service guide for a Mitsubishi XL25U Projector. If you can point me in the right direction I would appreciate it. Thanks in advance |
16-03-2010 | | Well if a wire has zero volts on it with the unit in the "off" state, then the power button is pressed and it becomes, say 3.86 volts in the "on" state, AND it reliably repeats this pattern each cycling of the power switch, then the &q |
16-03-2010 | service manual needed | Need a service/repair manual for philips x 58 notebook |
16-03-2010 | | sorry u couldnt fix it:( |
16-03-2010 | samsung rear projection TV (PCL5415R) won't turn on | HELP: my samsung rear projection TV (PCL5415R) won't turn on suddenly. Tried unplug and plug back the power, won't work. The timer light looks on, but very dim. Any suggestions? Thanks. |
16-03-2010 | | ok, thanks. I just wanted to make sure the voltage I had was correct, didnt want to assume it was correct and im supposed to be looking for 18 or 24 volts from that wire. Thank you for all your help and time, so now I need to get the backlight inverter bo |
16-03-2010 | Beovision 8 32" | Hello Im trying to help a frend whit hes BeoVision 8 whit a loos cornection
bud i cant open the TV i have removed all the Scroes. bud cant figer out who to remove the cover and i dont whant to leve a mark so can some one tel me who to do it? |
16-03-2010 | | Look for fluid on any of the boards from the picture tubes. |
16-03-2010 | | have not recv it yet but will update you Keep your fingers crossed |
16-03-2010 | | This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
17-03-2010 | philco k-1426-121 turntable | My daughter just rec'd a philco turntable as a gift. It looks like it is from the 50's. It is in great shape and looks like it just came out of the box with no wear or tear, dust etc. The spare needle is taped inside the cabinet.
My problem is it d |
17-03-2010 | Re: PIONEER PDP v501x parts | [quote:1fa5e5374d="casadims"]Sorry, guys I am new to this forum,...but I do have a PDP v501x Plasma that was working GREAT! but now has some issues,so if anyone is still looking for parts, here ya go! thing look brand new! Hope someone has an interest.[/q |