|30-12-2009||i need the electronic schema of monitor dell 19 inch M993s||i need the schema electronic of the monitor dell model M993s 19 inch to replace the vga cable defectueux|
|30-12-2009||sony avd-k800p dvd surround system not working||The dvds were stuck in the 5 disk surround system , then I had to manually openm the case to remove the stuck cds, the player comes on but nothing works, when u hit function it goes to dvd mode and it says # 5 dvd is active and it will not clear, how do I|
|30-12-2009||Canon Pixma iP2000 service manual||Hi all, I need the Canon Pixma iP2000 service manual.
Could someone send me it at firstname.lastname@example.org?
|30-12-2009||Flat cable of a sony camcorder||Hello!
I have a sony camcorder dcr-pc105e and inside it, I have a small flat cable that is broken.
Is it possible to fix a small flat cable? My only option is to buy a new spare part? Where can I find this type of product?
Thanks in advance,
|30-12-2009||Parts like that for just about anything electronic take a lot of skill to find, IF the part is available.
It is possible to repair flat ribbon cables, but the nature of the break must first be considered. If it was due to wear, then a repair at the bre|
|31-12-2009||software reseter Canon iP1000||Waste Ink Counter Reset.
Step Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
Step 1: Manual Temporary
1. Turn off the printer. And disconnect the pri|
|31-12-2009||i found at http://free-download-resetter.blogspot.com/2009/12/canon-ip1200-1600-2200-resetter-printer.html
|31-12-2009||Minolta/Dialta di3510f repair manual||I recently acquired a dialta di3510f multi function machine from a defunct business. Plugged in and every thing seems fine but I have an error message on the front screen that the bottom right door is not closed. It seems to be but no matter how I minipul|
|31-12-2009||Viewsonic N3251w||I have a Viewsonic N3251w that has a bad power supply. The N3856VA chip gets very hot and the area on the opposite side of the PCB is darkened. The backlight will turn of after a while and there is a loud high pitched noise while the backlight is off. Eve|
|31-12-2009||That was me that posted the last message. For some reason it did not log me in when I posted.|
|31-12-2009||You can get the Minolta Di3510f service manual at www.schematics.me|