|20-05-2008||Audiovox plasma - sound but no picture||I'm hoping you can help me. I recently acquired an Audiovox FPE4216P that is not working.
The previous owner said part of the screen was redish in the top center then extended across the top and down through the center. Then one day, while watching it |
Help please if you have the time.
The picture looks like if it could roll it would. But snaps quickly between trying to do that and normal. So because it can't roll it basically flips back and forth but so quickly that the picture is always |
|21-05-2008||It is quite common that such power supplies do not work properly without load. Try loading down the +3,3V and +5V with some 0,2 - 0,5 A by resistors and see if it works better then.|
|21-05-2008||sharp AR-150 sevicemanual||hello to all,
who can upload the servicemanual for a sharp copymachine ar-150?
thanks a lot !!|
|21-05-2008||dell tft 2007fpb no power||can there can anyone help me ?? i have a dell 2007fpb tft screen and it will not turn on , no green or orange light when pc is turned on|
|21-05-2008||finally back||The day you posted the answer is the day I headed to the hospital - completely unexpected. I'm back - put in the resistors and two 160e, much better picture, the magic focus works whereas it used to stop at G and give the error code 5. Did a manual focu|
|21-05-2008||Philips mod;50PP92 0217,chssis DPTV305 covergence problem||this set came in dead replaced the conergence IC's with the good ones got set to turn on tried to do a manual convergence but notice that the red & blue seem to be pincusioned on right side ckecked R3804,R3805,R3806 which are 220 ohm 1% in the defle|
|21-05-2008||RCA mod; R52WH74, Chassis ITC222A need schematics||Any one know where I can get a set schematics for this set can't seem to find them any where|