|Perhaps it was hiccup?-seems OK now
|there is one other issue though! maybe its easy to fix... i have a pair of speakers plugged into the A channel, and they will short out depending on the movement of the B speakers button. this is a problem the receiver was having before. we usually have
|Only three possibilities:
1) Either end of J5/J6 connectors or any pin(s) of S570 could have bad solder connections. All of these are on the speaker switch board. The main board ends of J5/J6 hopefully were inspected earlier, plus the having to wedge the
|RENAULT CAR AUDIO BLOCKED
|HELLO MY FREIND I HAVE A RENAULT CLIO 3 AND THE CAR AUDIO SHOW IN THE SCREEN "BLOCKED" PLEASE HOW I CAN DEBLOCK THIS MODEL
|Can you please share the Service Manual
Can you please share/point me to the service manual?
|if i remove both ic,s what happening to error message ?
|samsung UE40F5700AWXXN schematics
Is it someone that can share samsung UE40F5700AWXXN service manual with schematics.
Many thanks in advance
|yep checked the solder joints on the main board weeks ago when i first disassembled it and they looked good... so do the joints on the SP switch ass. (see pics). i've noticed that the optimal placement of the Speaker B button is when the button is out (i
|NOT for free.
You may want to confirm by holding a strong flashlight beam on one side while you look from the other, that with each switch in the OUT position there will be nothing on the inside of the switch at the red dots when
|[quote:4b13cc0c2d="jts1957"]NOT for free.[/quote:4b13cc0c2d]
do you know safe code for:
Thank you so much
do you know safe code for:
Thank you so much[/quote:fac1dd1d15]
sorry we can't help
Main Dealer or a Decoding Service only for this code
|thanks again jts! the DeoxIt worked pretty well... i had to apply it a few times and work the buttons a lot to work it in there, but the sound is pretty consistent now! my dad is gonna be stoked!
|Just remember, it's a stereo receiver ... NOT a drink coaster. :wink:
|Teac CD-X10i will not play CDs
|I get the message "no cd" in the visual display. Tried cleaning the lense. Any suggestions?
|Using A and B speakers really requires 16ohm speakers?
|I have an old home theatre amp (cheap Sherwood brand) that actually says it is advisable when using both A and B speakers at once, that speakers be at 16 ohms. I have never seen this on any other of my amps.
I am using this to amplify signals from an
|When using both A & B speakers at the same time, you are in effect halving the total impedance seen by the amp section.(hence 16 ohm speakers) Rather common issue with many, many low end receivers without any such warning to the end user.
|hd-70g886 service manual needed
|looking for the service manual it should cover models hd-61z786 hd-61z886 hd-70g886. Would appreciate any help with finding this service manual thanks
|Thanks for the succinct answer. That is what I had thought in the back of my mind, though now that it might damage the speakers, I will change my plan. Since the drums can be mono, I will send only one channel through the my dedicated subwoofer amp to t
Wait til ...processing turns to [u:16c17cb1ad]Get Manual[/u:16c17cb1ad]
|hi i have this system and love it, but its gave up the ghost, and as now got a fault, which i hope someone can help me with,
the fault is when you press the power button everything lights on and turns on for about 30 seconds and the shuts its self off,
|dc-z83 & xd-z63m are available at elektrotanya