| Date | Header | Text |
|---|
| 01-06-2008 | Monitor | I have a problem with my Monitor. While working a bright while light appears in the centre of the screen. The screen appears blank above and below the white line. When I shake the monitor slightly it recovers temporarly. Please help me. |
| 01-06-2008 | black and white tv | Old Black and White tv used to create problem after being used for long time. They used to show a line instead of Picture. What did you do to repair it?
I used to hit it on the top. :D |
| 01-06-2008 | Bush tv cermic capacitors on crt wire | Hi
I think I have fixed tv now but I have broke a small cermic capacitor it is connected from the wire that goes round the crt to the shelding on the tuner input. I assume it is for filtering does anyone know what size it should be and the voltage. I h |
| 01-06-2008 | Re: Bin for neo tv-2166tx | [quote:062553e2bf="Momir"]Can anyone send me bins for:
neo tv-2166tx CPU ST92195C781/MTH and
neo tv-2166tx CPU ST92195C781/MTF
My e-mail is [email protected][/quote:062553e2bf]
Check your mail |
| 01-06-2008 | Beko TVB10080S | Hi all,
I have aproblem with a TV BEKO TVB10080S (shasis ZA1.190-08)
TV start ok and work good for 10 seconds (somtimes work till 1 hour) and in scren appear a foto (hand with spanner) and go to standby and led blink 3 times.
Can somebody know somthing |
| 01-06-2008 | | You probably have a poor solder connection in your vertical deflection circuits/wires. Try removing the case and poking around with an insulated probe. |
| 01-06-2008 | Zenith SJ-2743LK picture comes and goes | Hi, I have a Zenith SJ-2743LK console TV. A late 80's model that has worked great. Last week the picture started to go out. Now it comes and goes. When it goes out it goes to a dark red/black and looses vert hold. Anyone have a suggestion what to check? I |
| 01-06-2008 | Panasonic Cordless Phone, Model No. KX-TCM516BXB | Service Manual for Panasonic KX-TCM516BXB, can anyone upload link for this service manual.
Thanks |
| 01-06-2008 | MOSFET identification | I’m throwing up this post on behalf of chap I know who lives on a narrow boat so does not have internet access.
Basically I need a bit of advice identifying a blown MOSFET removed from his 12volt – 230volt inverter. He’s prepared to throw it away but |
| 01-06-2008 | norcent l72722 | The volume buttons dont work and also the mode button dont work
this happens after it warms up I checked the buttons and measure ok
the down volume does not work or some times it I push the mode button it
turns the tv off. Need help |
| 01-06-2008 | | 50n06 is the generic number, made by different manufacturers such as "UTC" or "ON semiconductor"---- FQP denotes the manufacturer which in this case is Fairchild. Here's the specs;
http://www.fairchildsemi.com/ds/FQ/FQP50N06.pdf
|
| 01-06-2008 | LG 42v6 Plasma Lower Y PCB Question | Hi,
Working on a Hitachi Plasma with the LG 42v6 PDP.
The display has a vertical data copy problem.
I disconnected the lower Y driver PCB to see if it was causing a problem.
As expected the upper half of the display and the data copy problem remained |
| 01-06-2008 | | Replace C2036 on the pip module. |
| 01-06-2008 | | Y DRV UPPER B/D ASSY 6871QDH066A. |
| 01-06-2008 | | You can try replacing the buffer board but it sounds like a bad panel. |
| 01-06-2008 | | That would work but you'll loose everything. |
| 02-06-2008 | | It's a nice site but unfortunately everyone expects FREE FREE FREE. |
| 02-06-2008 | Thank You | Minnie, thank you very much! That fixed it. Must be a common problem for this model. That cap was the only one from a different manufacturer than all other caps in the PIP. Zenith must have had a supply issue for that part. Well its back up and running.
|
| 02-06-2008 | | In order to get the battery charged, you must make sure that the charger can supply more than 12 volts. For trickle charging, 13,8 volts is ideal but if you want to be able to fully recharge a battery in reasonable time, up to about 15 volts is needed at |
| 02-06-2008 | | I don't think so in this case, as i have tried disconnecting the supply to the line output stage and loading the power supply with a lamp.
For the moment, that television is put out in a shed, waiting for better days and new clues... |
| 02-06-2008 | TV KV-HR29M61 has problem on HTT | I need schematic diagram or service manual on Sony TV KV-HR29M61.
Please email to [email protected], Thanks |
| 02-06-2008 | | If the car uses serial communication (CAN, RS-485 etc) between the instrument cluster and all other equipment, not much can be done without a CAN controller (or a PC with CAN interface and suitable software).
Otherwise, it should be relatively simple to |
| 02-06-2008 | | If you look back in the forum and repair tips of this site, you will find that the Vestel chassis 11AK19, 11AK45 etc are notorious for all kinds of strange faults. Those are used in lots of low-cost tv's, not only of the Bush brand. |
| 02-06-2008 | | Such capacitors should not be a problem to find if you have some electronics junk laying around. Typically, those are used as "Y" capacitors connected from mains to ground or between primary and secondary side of switched mode power supplies, i. |
| 02-06-2008 | | Try reading it out on a computer with a different operating system - i.e. if your laptop is a PC running Windows, then try the card in a Mac or a computer running Linux and see if it works.
There is also lots of data recovery software that you can try, |
| 02-06-2008 | flyback lines on a PHILIPS 28PW6515/05 with A10 chassis. | I have a PHILIPS 28PW6515/05 witha A10 chassis.
My problem is flyback lines across screen and reddish/purple tint no picture. I have replaced the painter chip as advised by most people saying it is 90% of the problem with philips tv's but still same prob |
| 02-06-2008 | service code | Hi,
pls tell the service code of oxygen thunder 29 [email protected]
regards
deeps |
| 02-06-2008 | ask bout TX-2B | hey,any expert here.. :D wan to ask about TX-2B.it need to write programing or not?i check the datasheet already but not very sure.
[url]http://pro-radio.ru/user/uploads/126799.pdf[/url]
can u check izit this circuit got any problem or not page 9..
|
| 02-06-2008 | ask bout TX-2B | hey,any expert here :?: wan to ask about TX-2B.it need to write programing or not?i check the datasheet already but not very sure.
[url]http://pro-radio.ru/user/uploads/126799.pdf[/url]
can u check izit this circuit got any problem or not page 9..
t |