Date | Header | Text |
13-02-2007 | Marantz - Integrated Circuit NJU7313AL | OK,
I will try all your suggestions and let you know later.
Many thanks again.
Cesar |
13-02-2007 | | Sorry, thinking samsung. Take the screens off, cover the blue and red tubes. Adjust green back as straight as you can. Then do the same with the blue, then red. Or in convergence b see if there's a factory restore. |
13-02-2007 | Re: Model number | [quote:23445a341e="yeomp"]The model number on the power supply board is:
0469D03
Is there any way to get a replacement board? I was thinking of grabbing a broken screen off ebay and switching the boards, but if there is another way...[/quote:23445a34 |
13-02-2007 | Canon PC-1010F Wont power save | Have a Canon PC 1010F that will not go into Power Saver mode. Anyone have any ideas? |
13-02-2007 | Monitor DELL D2128-TCO NOKIA Model: 445R061 Dump EEPROM | Hi guys.
I Need Dump EEPROM for this Monitor.
I had choose INITIALIZING in SERVICE MODE.
Now i have in MAIN MENU AUDIO Option.
Please help me. I can't find this dump in Internet. |
13-02-2007 | Sony KV-EF29 not working | Hello,
I have a Sony KV-EF29 (BG-1L) which is not working with the fuse and IC601:STR-S6709 exploded. Area around pin 1 & 2 burnt and s/c plus resistor R619 which leads to pin 6 of that IC, burnt. I have checked the Horizontal Output transistor and |
13-02-2007 | Magnavox 25TR12 No Verticle/Horizontal Sync | I just had this problem and thought others may need to know the fix.
Replace C 432 100mf@200vdc with 100mf@250vdc and check for bad solder. |
13-02-2007 | 37fd9944/01s | Mine just blinks continuosly..... what the problem with mine.. please... |
13-02-2007 | | If you take it to the dealer, they should do it for you as you wait.
They may want to charge you something for it (around £10)
:) |
13-02-2007 | | i have 130 volts on an alumminium heat dissipator. Is this normal? |
13-02-2007 | Yamaha PD-2500 | Please, I need service manual really bad! Thank you very much!
lenkin_tata(at)yahoo.co.uk |
13-02-2007 | MATSUI TVR 180T | Hi, I have problem withmy TV, I lost my remote controler and i cant put PIN number when switch on. Please help me to find way to unlock pin without remote controller. |
13-02-2007 | camcorder canon ex-1 hi8 | canon ex1,ex2,l1,l2
Though these are older camcorders they are still quite popular. The owners paid good money for them when they were purchased and are reluctant to part with them. They are quality camcorders especially the A1 Digital, L1 and L2A or ex- |
13-02-2007 | | In general heatsinks are usually at zero potentional, however depending on the circuit design, it may easily be sitting at any potential where it may have direct contact with a collector casing of a transistor or body of a regulator tab.
Your ground r |
13-02-2007 | BOSE 802C SYSTEM CONTROLLER | PLEASE, GIVE ME SCHEMATIC DIAGRAMM. |
13-02-2007 | | you first have to check rectifier circuit and the big cap also flyback. |
13-02-2007 | | What screens?
I have put every thing back to the Factory settings as close as I could get them. But it still doesn't look like it used to. I guess I will chang the IC'S and see what I will have to do next. If I have to I will call the repair man.
|
14-02-2007 | | search in zarekmanuals.com |
14-02-2007 | A solution for the Acer AL1511 "no signal" blackou | Hi y'all. I think this might resolve the problem...
On the Acer AL1511 are some control buttons (AUTO < > MENU). After booting up, I used the MENU and <> buttons to get to the OSD settings. I changed the "OSD Timeout" from 20 to 50, |
14-02-2007 | 11ak30 | Horicontal output BU 808 will blow out from time to time....Can working for weeks but suddenly blow............ :wink: |
14-02-2007 | Re: 11ak30 | [quote:d651bb4fc9="Kena5"]Horicontal output BU 808 will blow out from time to time....Can working for weeks but suddenly blow............ :wink:[/quote:d651bb4fc9]
replace c613 10uF/63V |
14-02-2007 | SCHEMATIC OR ANY INFO ABOUT COMPAC 1520 , SUPPLYER OF LAMPS | HI, I HAVE A PROBLEM IN A BOARD RESPONSABLE FOR THE SUPLIER OF LAMPS, THIS LAMPS HAVE A VERY LOW BRIGHT.
I´M GETTING CRAZY WITH THIS MONITOR.
ANY ONE CAN HELP ME?
THANKS AND SORRY MY ENGLISH |
14-02-2007 | COMPAC 1520 | HI, I HAVE A PROBLEM IN A BOARD RESPONSABLE FOR THE SUPLIER OF LAMPS, THIS LAMPS HAVE A VERY LOW BRIGHT.
I´M GETTING CRAZY WITH THIS MONITOR.
ANY ONE CAN HELP ME?
THANKS AND SORRY MY ENGLISH |
14-02-2007 | | You have to change the ic's before we go on. That will tell us where to go next. |
14-02-2007 | Re: need servis manual tv akai ct-h43c7sa | Hi Eric ,
Did youy ever got that service manual for the akai ct-h43c7sa....??If yes can you email it to me on [email protected] please since I need this urgently...Many thanks,
Vilic. |
14-02-2007 | Umberto | I have acquired an Eastman Kodak AC-DC Tube Amplifier CW 120750.
Made in Rochester NY., U.S.A. by Eastman Kodak Co.
someone has information on this amplifier?
Thanks for the answer.
[email protected] |
14-02-2007 | philips 32pw9576 | Hello,out there. I have just replaced the BU2025 driver transister and both power relays. The set is now working but is stuck in Service Mode.
Pressing Menu twice doesn't get rid of it. Anybody have any ideas please? |
14-02-2007 | I need a service manual for an Advent HT2751A TV | Can any one help me find a service manual for this TV?
Or maybe a place I can find parts for it?
I am in need of a power supply regulator (so I have been told)
Please help!!! |
14-02-2007 | advent HT2751A TV regulator | I am looking for a power supply regulator for my Advent HT2751A tv.
Can anyone help????? |
14-02-2007 | Need Service Manual / Schematics Mits VS50501A | Need Service Manual / Schematics Mits VS50501A.
Have the above, changed the STK convergence chips, same hourglass Problem
Any Help Appreciated
Thanks
[email protected] |
14-02-2007 | | Thanks. IC's are on the way. hopefully the wife can get them in on Mon or Tue. |
14-02-2007 | Need servicemanual for United TV model utv7007 | I need the service maual to figure out how to store channels on this tv. I can find them easily, but as soon as I change the channel and then change back to the channel I just stored it's gone.
Just need to what it says in the manual. |