|27-11-2009||Forget for now the logic board.
I looked again to the "photographic service" made by you.
You have most likely a defective Y-SUS BOARD and the two Y-BUFFERS
TRY FIRST to find those and replace Y-BUFFERS AND Y-SUS. ('8)')
|27-11-2009||See a number of missing parts in photos of your last post ... so I'd say no, they are not fully compatible. :(|
|27-11-2009||OH by the way
I gave just now a look around
these parts are common even on PHILIPS TV with same panel equipped.
You can find now all spare parts on ebay for very low price (':)')
(ask sellers all what you need before bidding or buying anyth|
|27-11-2009||Samsung 2232 BW shadows moving across screen||hello
i got a nice free samsung lcd monitor from my brother
sadly it has severe shadowing that trails across the screen.
i have tried it on different computers/laptops and same result.
it does not appear if i pull the vga cable out then it shows t|
|27-11-2009||OK [b:aaa5c78c48]The_AntiRAM[/b:aaa5c78c48], then next is target :
I am so happy for your help ..... this mean a lot to me . :)
Y-Buffer LJ41-02760A (UP)
I must try to found on ebay.de , because I am in eu|
|28-11-2009||This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
|28-11-2009||multitester sunwa||help me que valor tiene resistencia R26 en el multimetro sunwa YX-360TRE-B, gracias..
|28-11-2009||Mitsubishi HS-U70 HQ question...||I have one of these vcrs that I bought several years ago. The SVHS circuitry gave up the ghost about three years ago but it would still play regular vhs tapes until one of the rubber belts broke a few months back. I still have the original remote, box, an|
|28-11-2009||maybe something wrong with the cabling connection of B+ of your radio to the source. Better you check and follow the diagram ( it usually found on the top of the radio case.|
I know this topic is old but i believe i have the same problem..
I have too the prolite e481S
But i dont understand what does it mean "L101" ?
What have i to do ?
In short, actually my monitor even doesnt want to work for a while, i |
|28-11-2009||I need the Key Code for my Becker (Mercedes Benz||I need the Key Code for my Becker (Mercedes Benz):
serial ¹ 58067839
Mersedes Benz:TYP trukline cd70 24VOLT
A 000 446 04 62
Many thanks in advance|
|28-11-2009||It makes an excellent door stop or large paperweight. :D|
|28-11-2009||shadows and jitter||thanks for the reply Justmanuals
does the service manual say anything about shadows and jitter
in the picture?
|28-11-2009||UXP-55 goes automatically in standby||Hi,
Disassemble the cd laser unit. On this unit you have to desolder the pcb attached to it. There is small pnp transistor check it, in most cases it is conducting e to c. change it with a similar type. should now work the system.
|28-11-2009||50PFP5332D Screen Issue/Repair||Hi everybody,
Im new to this forum so hello! :)
I was attempting to fix my Phillips 50PFP5332D/37 plasma screen with parts from another one that I had laying around (thanks to phillips warranty service I got stuck with two bad tv's but atleast I got|
|28-11-2009||I guess I have my answer then. :D
I was hoping there would be something a little more constructive I could do with it but I'm not surprised that there isn't.|
|28-11-2009||REPAIR PLASMA TELLIE.||In Deutschland findest Du alles, was du benötig.
In Germany you will find all what you need.
Remember that are common parts between PHILIPS AND SAMSUNG
because of the type of panel.
And anyway this failure is a very common fault|