Date | Header | Text |
15-03-2009 | | Belts? |
15-03-2009 | sony kv3400v2 | I have a sony kv3400v2 Tv.The picture is ok,but light green with retrace lines are seen.
With Regards,
Ramji M.H. |
15-03-2009 | Service Manual for Magnavox TS2756C102 | HI All Does anyone have a Service Manaul for the MAgnavox TS2756C102
Would Greatly Appreciate a Helping Hand
Thanks |
15-03-2009 | Mitsubishi VS-4551A | About to be given this set. In the past there was an issue with no picture. My sister had a friend of a friend repair a board. The only thing she can remember is this board feed power to the lamp. This set currently takes about 10 minutes for the pict |
15-03-2009 | | Did you try turning down the screen control on the flyback? |
15-03-2009 | | Have you tried unplugging them and plugging them back in? |
15-03-2009 | | Not being a tech, but speaking from experience, it could also be the lamp (bulb)
HtH
[email protected] |
15-03-2009 | | I think this is a 3 crt set. |
15-03-2009 | | Whats wrong with it? |
15-03-2009 | | Would belts cause behaviour like that? I was thinking that the spindles wouldn't even rotate in that case. |
15-03-2009 | | Sorry jts1957 but that is my response above. I thought the forum had looged me in when I posted. |
16-03-2009 | Re: PC problem | [quote:3430e1af6e="ashugtiwari"]Hi All,
This is not electronic question exactly, but can somebody tell me the solution for PC repair. Actually, my PC is switching on and monitor is working fine OK, but it is displaying nothing, even hard disk and DVD dr |
16-03-2009 | | Take a marker and put a dot or line on any guide, pulley, flywheel, idler, etc. that the belt rides on. Then try a mode.
The motor should have a pulley which turns a belt which then moves and turns the next thing in its "path," etc.
For exam |
16-03-2009 | | Ok I'll get it out and open it up tomorrow and do just that. I'll post with an update later. |
16-03-2009 | | Approx. 1994
VZ2 chassis. |
16-03-2009 | pioneer DEH-16 | DEH-16,,. FUSE OK,. THANKS KENRAY |
16-03-2009 | hp 6p printer problem | salam;
my printer is hp 6p lasar jet. when we give any job to printer first printer initializing but cannot pick paper after initializing it,s now stop and show error. [color=red][/color] |
16-03-2009 | LG MC99AA chasis- Model 29Q14TP, works well for only 20secs | LG MC99AA chasis, works well for only 20secs.
and goes off, switching on again will only go for 15 - 20secs. and revert to stand by with red led on.
Any help would be appreciated |
16-03-2009 | Primma Tv 20" no model number, uses strs6707 pwr supply | Primma Tv 20" no model shows.
Has an STR S6707 on pwr supply and cannot switch on has continuous buzzing sound when switched on, any manuals or help |