Date | Header | Text |
18-02-2007 | fusible resistor blow up | And your question is what? |
18-02-2007 | Toshiba CX35C60 Service manual? | Where to find Service Manual for Toshiba CX35C60? |
18-02-2007 | | is this for same problem.the 2oo volt cap is near the flyback and is rated at least 250 volts.was the 200 volts present on crt neck pcb? |
18-02-2007 | Car guy, not a Tv guy! | Im not sure what a pcb is or where it even is with out a service manual. |
18-02-2007 | | sorry the neck board is located on the back of the picture tube.one of the connectors will supply 200 volts to the collector of the drive transistors.if 200 volts is low probably capacitor problem from main board. |
18-02-2007 | | Thank you for the response. I have tried to find a schematic of the tv (I have the service manual and parts list) so that I can locate the C832. I assume the "tact switch" is the push button switch on the front of the set.
Since the bak of |
18-02-2007 | gb51hd09 made by apex, need service manual or schematics | i am in desperate need of schematic or service manual for apex 51 " hdtv projection. i had a leak in roof and found the board that is coroded, i need to know name of board so i can get a replacement. it is the lower main board that lays on bottom of |
18-02-2007 | | [quote:8e2dca9809="minnie"]Pic you attached is no good.[/quote:8e2dca9809]
it didn't get the msg across? I'll try to take an actual picture then. |
18-02-2007 | Re: JVC KZ-V10 | Hello I am also looking for the service manual for the KZ-V10 or KZ-10MV Thanks
[email protected]
[quote:3b05193ec0="robgill04"]Hi,
do you have a service manual foe a KZ-V10
many thanks in advance
Rob
[email protected][/qu |
18-02-2007 | | Pioneer is continuing to offer a free, in-home/office power supply replacement for certain of its second and third generation plasma models listed below for customers who experience a problem with the original power supply. If a model is not listed below, |
18-02-2007 | Re: AMBIT INVERTERBOARD MODEL T051023.00 | [quote:f42da24cd9="KILLER_K"]Hi,
Well i have a Dell lcd 20.5 inch lcd model # 2000fp, and as we stand the
inverterboard has went out on it and i am trying to find a schematic on
this inverboard or some information about the parts that has went bad.
|
18-02-2007 | Philips 28PW6324 Tripped with st/by LED pulsing | Hello,
I have a Philips 28PW6324 which has tripped with st/by LED flashing (some burning smell when powers-up).
One old posting by "plamensl" suggests "FB tuning cap 1n5 2kv burnt" as a possible cause.
Circuit diagram for th |
18-02-2007 | | They are all the same microfuse rated at (1.4Amp@ 36V).
Original Sony's number 1-576-406-21 which has been subbed to 1-576-406-11. (ok to disregard the 36volt rating as it pertains to physical size if looking for a generic microfuse)
...No set va |
18-02-2007 | | have you checked the crt neck boards for cracked traces yet.common problem.ive fixed 10 already at least. |
19-02-2007 | codes... | Install E-mule, then connect to a server and perform a research for "car decode"
You should find several results, including "the best car radio decode compilation.rar". Download this one, it provides several softwares to decode seve |
19-02-2007 | | [quote:f606591c6b="cory"]have you checked the crt neck boards for cracked traces yet.common problem.ive fixed 10 already at least.[/quote:f606591c6b]
Sounds like he's heading towards a convergence issue. |
19-02-2007 | JVC GR-SXM730U MANUAL | If anyone can help me, I need the users manual for JVC GR-SXM730U. I let a friend borrow the camcorder for her wedding and she lost the manual!! Thank you so much.
My email address is [email protected] |
19-02-2007 | Same Here | Mine jst all of the sudden one day shut off and wouldnt come one. Unplugged and left it over night then it came on but goes off soon. Something is like getting hot. Maybe?
[email protected] |
19-02-2007 | | Download direct from JVC
http://books.jvcservice.com/download/1017629887/25484.PDF |
19-02-2007 | Found a workaround, but problem remains | Update:
I could adapt the X-window parameters to get the image inside the
screen, and the H and V frequencies are within the documented
ranges. Things are not well yet, though. In text mode, the image
is still way too wide (at standard VGA frequenc |
19-02-2007 | deh-p650 | hello
i have this manual in pdf fomat the file is 6.2mb so let me know how i can send it to you
all the best
ian |
19-02-2007 | Re:Failure to boot from hard drive | I know Vista doesn’t install itself easily. Something must have happened, that’s for sure. What software you have used to recover your data? One of the data recovery software I know is Salvage Data recovery Software for windows. My friend used the softwar |
19-02-2007 | BWD 830 Oscilloscope | Hello all,
I am searching for a circuit or service manual or photocopy of either, for the BWD830 Oscilloscope.
I hope this request is in the appropriate part of the forum.
If you are able to help, I will naturally pay all costs involved.
Thank y |
19-02-2007 | plasma JVC PROFFESSIONAL GMV42PCEB 1 | [/url][/b]GREEN LED LIGHTS ON FOR 30SEC BEFORE GOING TO STANDBY, AT NO TIME DOES THE UNIT POWER UP? |
19-02-2007 | | [quote:8f6be9f13c="minnie"]You've lost control of your convergence. STK392-110's have failed. 5 years is pretty good. I'll rebump the convergence ic's post.[/quote:8f6be9f13c]
Thanks minnie I can't wait to see your post |
19-02-2007 | Grundig Cinaro (cuc 1935) focus module (R64003) | Hello,
I own a Grundig TV with chassis cuc 1935 which doesn't power on and always stays in standby for 3 weeks now.
I found the service manual and identified the problem :
2 condensators of 1,5nF/6000V and one resistor on the focus module (common |
19-02-2007 | Kenwood KDC-M9021SE has problem | Hi, I had problems with a my Kenwood KDC-M9021SE mask system. The problem was as usual with these kind of radios was the ribbon cable from t mask to the radio unit. I have replaced this ribbon cable and the mask system works again, but there is still a pr |
19-02-2007 | | up! |
19-02-2007 | really hard... | to find, but I hope that someone here will be able to help you... |
19-02-2007 | Same problem | HI guys, i have the same problem, a try to unplug and replug and the display still off and i can´t turn off the equip.
I would like to know if you already solve this problem. Thx. :evil: |
19-02-2007 | FORD KA RADIO CODE | Hello !!!
I need keycode radio ford ka 2003 made in Brazil
ADD026677
THANKS.. |
19-02-2007 | thanks so much | I had this same model tv didnt know what the problem was but this was it! I had to say thanks you dont know how much this helped me out. I appreciate the help guys :) |
19-02-2007 | Panasonic CD stereo system - F61 error | I have a panasonic cd stereo system, model SA-AK500, and each time i try to turn it on F61 shows up on the display and then the stereo shuts off.. What could be causing this?? i seen on a earlier forum that someone suggested that a F61 error is a protecti |
19-02-2007 | sony kv32wf1e | hello,
my sony tv have horizontal lines across the image and in the middle they shrink. I´ve check the vertical ic, diods near and caps.If someone have a suggestion, please!
Tanks |
19-02-2007 | | Technics SU-V5 Service Manual
[url]http://www.manualdirectory.co.uk/Detailed/15472.html[/url] |
19-02-2007 | Volume Potentiometer For Repro Grundig 960 | Hello...were you ever able to resolve your problem with the volume on/off switch? I'm having the same problem with mine and I'd like to be able to fix it myself. Any information you have would be greatly appreciated
Thanks
~Andrea |
19-02-2007 | Need Service manual for SONY DSC-P8 !! | Hi :) i looking for service manual for SONY DSC-P8
for help thanks ! |