I just had to thank you for solving this
I had exactly the same problem and after I saw your post with pictures I decided to try it out.
I have never done much of soldering before and I did it!!!!
Now it's running just like two years ag|
|26-04-2007||power led blinking only when powered up||i have this samsung tv set with chassis no. k15a it has a standby power but wont go through when u push the power button the green LED just blinks and turns to stand by again.|
|26-04-2007||[quote:3abd774048="awright"]Well, yeah, you are messing with relatively high power equipment and can get into embarrassing situations. It's par for the course.
A common induction motor drives power back into the power lines if it is driven at above sy|
|26-04-2007||logik LCX27WN2||this LCD has sound but picture comes up blue with "1 TV" top left hand corner then black screen. same for all inputs. any ideas?|
|26-04-2007||samsung model k15a||change the C851 (47uF 50volt) cap. If the 125 volt high tv turns the stby.|
I am pretty new this all, so any type of help regarding this issue will be welcome.
I have a Hitachi c28wf560n, Vestel 11AK45 chassis. Couple of days ago when i switched on the TV, it produced a "zzzz" sounds followed by a bang and from t|
|26-04-2007||Based on my model #, I dont think thats the right manual. Thanks, though.
|26-04-2007||where can i find the pin cushion transistor & can u plz tell me what & where the pin cushion circiut is ?
|26-04-2007||I have the same issue, my original remote went bad and I just got another remote, but have forgotten the code from way back when....anyone have the universal reset code? or is there a standard string out there? I have tried all sorts of combos...
|26-04-2007||Great got it thanks, gone ahead and bought another sub board (AA95-00705A) for a direct swap and also went ahead and got some STK's as well to repair the old board. Thank you Cory for all your help.|
|26-04-2007||Replace the vertical ic and caps around it.|
They will rebuild the tube/tubes. Screw doing all 3. I just do the one that's bad for now. If you do all 3 you may as well buy a new set. The story behind the tubes is the mfr used phillips tubes. End of story. It's sad. I |
|26-04-2007||Check the horizontal out put transistor near the flyback to see if it's shorted.|
|26-04-2007||Epson||I'm looking for a free download of service manuals for Epson CX & r Series printers-so I could add them ManualDirectory?|
|27-04-2007||Pioneer VSX-29TX Service Manual
English - 6.83 MB
|27-04-2007||Forgot to mention in also the manual also covers the VSX-27TX, VSX-26TX, VSX-24TX, VSX-D908S|
|27-04-2007||not exactly sure on this model but it will be near horizontal output transistor but smaller in size and will be on a heat sinc.three pin transistor.|
|27-04-2007||most universal remotes have auto scan feature to find code,that should work.if not try channel up or down to change.|
|27-04-2007||Amstrad PCW 10 Service Manual||Can any one help me with a service manual for the PCW 10
|27-04-2007||Multi-language user manual download:
|27-04-2007||Schematic for Dell Lattitude cpx h450G||I need to replace the cmos battery on this laptop and can't seem to get the field manual to download.
Can anyone help me?|
Can anyone advise me a link to get free datasheet for IC: LP7510