Date | Header | Text |
06-06-2008 | Samsung Front Screen... Any ideas? | A friend of mine (who's not on the net) has a Samsung Rear Projection TV with a split from screen, his kids where being to rough in front of it!.
He's looked on Vance Baldwin to try to get a replacement and they have one listed @ $240. The part number |
06-06-2008 | BUSH 2571NTX- screen size collpase from sides | Please can somebody help me to rectify the picture size on the screen on my Bush TV model number 2571NTX PLAT (SN: 5101353000152). The image or the picture is clean, however, appears in the middle (shrunk from wide screen format) with balnk spaces on the |
06-06-2008 | thanks, but more ?s | Thanks Minnie.
Can you please let me know what the designators are for the 6 yolk return resisters (and where they might be)?
Also what should the ohm values be for the resistors? (Incase I can't make out the colors on the bands/validate that they a |
06-06-2008 | | fault reported many times on this site, search as 11ak19 or 11ak19pro which is the chassis type, this set is a very unreliable "budget" model. many engineers will not repair them. |
06-06-2008 | Jvc Tv Av21TE sound is ok but there is no picture | I have A jvc Tv Model Av-21TE it was working normal but from time to time the picture was fading & now it totally stops . sound is ok but there is not picture what can be the fault help plz |
06-06-2008 | toshiba 42 pw 23p | I have a problem with a Toshiba 42PW23P rear projection tv. After the receiver had been left off for a month it now wont come out of standby. The LOP stage is working and the cameras are illuminated...any ideas guys? |
06-06-2008 | PCB Schematic | I'm looking for a PCB schematic so that i can attempt to figure out what is wrong with our boards and try to fix them. The board (control module) is made by Label Systems Inc. It's from a labeler Model Number 3000 the board itself has the number 21000F ( |
06-06-2008 | Re: toshiba 42 pw 23p | [quote:ca9b5a4af8="skytec"]I have a problem with a Toshiba 42PW23P rear projection tv. After the receiver had been left off for a month it now wont come out of standby. The LOP stage is working and the cameras are illuminated...any ideas guys?[/quote:ca9b |
06-06-2008 | | RK42 2.7 ohm
RK46 2.2 ohm
RK50 3.3 ohm
RK54 2.2 ohm
RK58 3.9 ohm
RK62 3.3 ohm all 1 watt
http://www.csgnetwork.com/resistcolcalc.html |
06-06-2008 | | What be the model? |
06-06-2008 | | Have you opened the speaker to see who makes the insides? |
06-06-2008 | fuse | I have found the the capacitors that need to be replaced. But can someone tell me where the fuse is? Is this a SMT fuse or some kind in line fuse. Would REALLY apperciate if someone could tell me where the fuse is. THANKS,
Dave/1745 |
06-06-2008 | | The pico fuse is usually green or black. It looks like a resister but only 1 band which indicates the rating. |
07-06-2008 | samsung DVD/VCR combo DVD-V530 need schematics | hi.
recently my father asked me to take a look @ his samsung DVD/VCR combo. unit would power up but shut down after about 5 seconds. upon opening it i noticed the motor that ejects the video tape was pulsating, disconecting this motor would allow the u |
07-06-2008 | | Look at what the unit cost. Sounds like a broken gear which means retiming the unit. Cost vs time. |
07-06-2008 | service tv phillips 14' | hi
i have a problem with a phillips model 1121/22b
it burns the power transistor BUT11AF
could you help me to solve the problem?
thank you |
07-06-2008 | tv service phillips | good morning
i have a problem with a phillips model:1121/22b 14"
it cant turn on and it burns the power transistor but11af
could you help me to solve the problem?
thank you anyway |
07-06-2008 | I need service manual Toshiba E203 | Help me, I need service manual (hand book) for photocopy Toshiba Estudio 203 |