| Date | Header | Text |
|---|
| 07-01-2008 | Looking Good | Hey Minnie!!!!! I replaced the two IC'S along with the six resistors using your PDF and the set works fine now. I ordered the IC's from B&D as you suggested it was an easy transaction. I just have one small problem with this set and I don't know if |
| 07-01-2008 | same problems | where is the C707 located? I found the E994 easily. I am not big on soldering. I used to do it with speakers when I toured the continental US, but that has been a few years. Is there a way to not have to solder? |
| 07-01-2008 | Kenwood VR5080 no sound?? | Alright people,
Here is my problem, I have a Kenwood VR 5080 and there is no volume. No matter what I tried I cant get it to work. Checked everything, fuses, power supply, mute, tape 2....nothing. Finally I found the schematics and after further tr |
| 07-01-2008 | | Wait a sec.... It is not as easy as you may think. Like I mentioned, it was very specific and limited to the particular devices. Meaning that if you are going to connect an MD or a writer, not only it has to have a AU bus , it must also support the app |
| 07-01-2008 | service manual book canon NP6650 | Posted: Sun Jul 31, 2005 5:13 pm Post subject: Service manual Canon copier NP6650
--------------------------------------------------------------------------------
Hi
I am looking for service manual for canon copier NP6650.
I trial find |
| 07-01-2008 | | check to see if any of the fuses have gone on the sus boards if they have fit the kit |
| 07-01-2008 | | Do you know if other identical televisions have similar linearity problems? It is fairly common that a television chassis which is being used in sets of many different brands with different tubes and deflection coils, shows bad horizontal linearity togeth |
| 07-01-2008 | WHO HAVE ANY SCHEMATICS FOR THIS TV | FUEGO
MOD : FE-PF29CSM7D
SOMEBODY IN THIS FORUM TO HELP ME WITH THIS SCHEMATIC FOR THIS TV..
Bye |
| 07-01-2008 | a problem witha grundig t51/440 | Hello!
I have a grundig t51-440/1e wiyh an ancient remote. I want to tune up the channels and i don't have any idea how to do it.
in the tv i have thevolume and programs (up/down) buttons plus 6 buttons: m,n,f,p/c, a small arrowto a point and an arrow i |
| 07-01-2008 | Samsung Syncmaster 171V | Hey guys I'm new to this and wanted your suggestions. Ok heres my problem.
I have a syncmaster 171v flat panel monitor. When its hooked up to a computer it displays the image for a second or two then the monitor shuts off and it does it again and agai |
| 07-01-2008 | | This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from http://www.justmanuals.com
http://www.justmanuals.com/advanced_search_result.php?keywords=np+6650&x=0&y=0
[email protected] |
| 07-01-2008 | Sony KP-43HT20 (RA-6) Chassis | Convergence all out of whack. Anyone have a service manual or a clue as to wear to begin? 19 year TV vet needs help! |
| 07-01-2008 | Fixfinder | For those of you with RCA problems, I have uploaded the Fixfinder program to help you out. Just type Fixfinder in the service manuals database search and download the zip. Disk 1&2 are the program and 3-7 are updates.(Read) the readme file for instruc |
| 07-01-2008 | | This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from:
http://www.justmanuals.com/sony-color-rear-video-projector-kp43ht2053hs2053hs3061hs2061hs30-chassis-parts-p-2269.html
15mb, 211 Pages
Paul@j |
| 07-01-2008 | Looking for VSX-D602S Service info | I have a VSX-D602S that is powers up but no audio output (speaker or Headphone). All input functions seem to work. Looking for Service manual, schematic or pointers. Fuse(s) OK
Thanks |
| 07-01-2008 | Service manual | I Need service manual of Samsung Syncmaster 173V LCD monitor If anybody have please mail me |
| 07-01-2008 | | hrm...
anyone know where i can find a service manual, or schematic to fix it then? i dont have money and the only places ive found require me to order it... |
| 07-01-2008 | | This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from:
http://www.justmanuals.com/kenwood-surround-receiverkrfv5020-v6020-v7020-vr305-parts-service-p-911.html
[email protected] |
| 07-01-2008 | AU BUS | whell you have a good point, you are right. Supposing that we have the Sony MHC-EX5 with a AU BUS on its tape recorder and a SONY cd writer with again a AU BUS, can this two devices cooperate? furthermore what kind of signal travels through this particula |
| 07-01-2008 | L6.1 chassis - power supply | Hi. I have to repair the power supply of a Philips TV with L6.1 chassis.
Checked the parts in, found short in: 7504(STP4N40FI), 6502(BZX C15), and 1 diode in rectifier 6506, burned fuse 1501(2.5 Amps).
Removed and replaced shorted parts from above, ch |
| 07-01-2008 | | Going by memory relay S901/#FJ00142 smack it w/the plastic end of the screw driver. It will go off but, replace it. It can cause long term problems. |
| 07-01-2008 | | Model #? |
| 07-01-2008 | | Replace your convergence IC's should be STK392-560"s and look for open pico fuses. |
| 07-01-2008 | | Philips 21PT1342/58 |
| 07-01-2008 | | In general, the control signals are almost always digital although there may be an analog reference element such as audio level or even a supply rail included.
Only the Manufacturer of the said equipment is able to provide you with the "compatib |
| 07-01-2008 | | Tv is a Philips 21PT1342/58
And it seems also that 3514 & 3515 are interrupted :( |
| 07-01-2008 | Thank you | Thank you minnie, I'll give it a go. |
| 07-01-2008 | Confirmation | minnie,
I just confirmed (2) 5amp pico fuses were blown in the power supply and believe your advice is right on the money. The owner of this set is a personal friend of mine and will be most greatful for the advice. The ICs are actually STK-570's howev |
| 07-01-2008 | vs-5078 mitsubishi | i have a vs-5078 projection tv
it come on some time and than their time it does not.it has sound but no picture.it like it have a mind of it own.
do you have a fix |
| 07-01-2008 | | That's normal, replace the STK's and pico's and you'll be fine. |
| 08-01-2008 | Yamaha 5 Disc Changer and others | When ever I see a problem like this, I check the little things first. In surroundings of where unit is placed, Is it damp there or are there heavy smokers around the unit because a thin film on your laser eye can cause a no read fault.
After cleaning t |
| 08-01-2008 | More Tips | I almost forgot, if the unit is belt driven in any way, check to make sure said belts aren't worn or slick as when those little motors are running, those belts have to get that mechanism closed and a slick belt won't do it.
FYI, Condom rings do not mak |
| 08-01-2008 | Relay. | Minnie I hope the reply was to me on the power light issue. Can you tell me where to look for the locations of these relays, would they be labeled and in the area of the actual power light? If I locate it and give it a rap with the screwdriver and the li |