Date | Header | Text |
31-05-2008 | | 42" Phillips LCD set. Pixels out like you describe is either the T-con board or more than likely you have a bad panel. Email me a picture if you can. |
31-05-2008 | | Please, do not post in caps. When you say out of focus I'm assuming you mean you lost convergence correction. If your convergence is off you need to replace the 2 STK394-250's. |
31-05-2008 | getting my blaupunkt cd changer to work after installing it | i have just bought a cd changer blaupunkt 5 cd changer to go in my peugeot 307, bought the cable connected it all up, but nothing happens, cd player and radio is fine but the compartment where the cd changer is nothing happens.
Am i doing something wr |
31-05-2008 | Problem with STR-DB725 | Hello i have a receiver STR-DB725. Wen i adjust bass and treble over 0 db one channel does not work it works only when bass and treble is on unrder 0 db and bass boost and tone is off |
31-05-2008 | I need dump | Send me your Email address where I can send the dump nokia9902smediamaster [email protected] |
31-05-2008 | kenwood kdc 2020 user manual | nead the user manual to knou how to ues it |
31-05-2008 | | That sorted that! LOL
I still have a 'wobble' on the screen, but I think thats to do with my rubbish lines when converging (try try again! LOL)
Also, blue seems to be more 'spread' than the rest and somethings on the screen have a nice blue outline. |
31-05-2008 | | Put up your convergence grid. There's a mechanical adjustment on top of the lens. You'll see a wing nut. Loosen it and turn it either way till you get the sharpest line you can. Then play with the screen and focus. Try the wing nut then focus and let me k |
31-05-2008 | | try to format it! |
31-05-2008 | use a 12volt AC to DC adaptor to charge a car battery? | I have an unused small black Uniross 12 volt adaptor that used to power an electronic piano. Both outlet cables are black. I have figured out using a voltmeter that the one with the white stripe is positive.
Can I cut off the small round metal plug on |
01-06-2008 | | Technically you can, but it is too small(low current) for car battery application & not practical.
1.25 max amperage will take for ever to charge a car battery & more likely will overheat & burn up it's txformer. |
01-06-2008 | VIELFACHMESSER IV from VEB MESSTERCHNIK MELLENBACH DDR | I'\m looking for a service manual or schematics for a analog multimeter
VIELFACHMESSER IV made from VEB MESSTERCHNIK MELLENBACH DDR.
Thank very much! |
01-06-2008 | RR auto AUTOVOX RA170 from Italy 1961 | I'm looking for schematics of AUTOVOX RA170 radioreceiver auto from Italy 1961.I want to restore him. Thanks!! |
01-06-2008 | | You can put a 12 volts 10 Watt lamp in series with the charger to limit the current to less than 1 Amp.
It has not much capacity 15 VA at 12 volts is about 1.25 Ampères.
It may be ok as a trickle charger but you need to keep an eye on that the T |
01-06-2008 | Bush tv (11ak45b5) Picture collaspe | Hi
I have been given a bush tv to have a look and and see if I can repair it. I am after so help I think the fault could be to do with vertical driver circuit are there any places I should look at first? are there any known faults with the tv, Any help |