Date | Header | Text |
29-09-2008 | Ford Explorer 18C868 radio display repair | I just attempted the solder repair. I am experienced at solder work and have the necessary tools. Unfortunately I was not successful.
I now expect to send the radio or maybe just the power supply to someone for repair. Possibly I can purchase just |
30-09-2008 | | [quote:a74e3836d9="minnie"]Did you try turning up the screen control on the flyback?[/quote:a74e3836d9]
Yes sir, i adjusted the control on the flyback ,the first one the lower section adjustment,it maybe the focus.because when the pic is snowy i adjust |
30-09-2008 | | thanks for the info......so tell me exactly what i need to get and start from the begining...i'm kind of on the intermediate / novice level in electronics
i remember triacs and all them other stuff from school.....lol. but the calculations is what i |
30-09-2008 | help " aiwa tv(vx-t2020) repair " help | hi
i have a aiwa tv (vx-t2020) that when i power on it , video started and tv go to standby . i think that problem is on the video timing system . how can i set the time system ? please help me .
thanks |
30-09-2008 | | I havent got any picture or sound, I notice alot of covergence problems are down to ic chip but would this be in my case. Is there a way of performing a diagnostic? Why does the light flash 5 times? Anyone know? Thanks |
30-09-2008 | Sony KVC2913D No Picutre | The above TV (Sony KVC2913D) has no picture, just horizontal lines. As if the channel is off tune. Audio is OK. Every channel is the same.
Any ideas on what I need to either resolder, replace?
The chassis is AE1B |
30-09-2008 | | vtech already told you what you need, buy yourself a book.
[email protected] |
30-09-2008 | | HI Greg..........
I REALLY need to find out if our Centrex 42 inch Plasma is HDCP compliant as otherwise our horizon warranty company is going to shaft us.
When we put the HD cord though the HDMI input from our PS3 it is all green and they keep saying o |
30-09-2008 | | you may not have hit all the solder connections. sometimes you have to remove the old solder and use all new solder. you may also want to check the switch board for bad solder connections on the display leads, every once in a while you get one where the |
30-09-2008 | | Can you post a picture? |
30-09-2008 | AE1 chassis | At the verticale PCB where the tuner is mounted,remove the IF module,open it and resolder the IF coils and all the GND connections + chip.
Resolder TUNER GND.
Resolder de connections of the little pcb between the IF module.
Remove all ELOc's in power s |
30-09-2008 | | minnie
I open the front of the TV and, checked for any leaks on each picture tube boards & the rest of the boards inside but couldn't find any fluid leaks. I assumed if leaking there would be a wet spot on any of the boards but there isn't any. a |
30-09-2008 | | Try this, if you keep having to hit the rest button, unplug the front key pad to see it you don't have a bad tach switch. Simply use the remote to turn it on. |
01-10-2008 | Technics RS-M222 Cassette Deck | Hello,
I need the following service manuals. Please help if possible.
Technics RS-M222 Cassette Deck
Thanks
[email protected] |
01-10-2008 | Sony KV 32S45 | My Sony KV 32S45 is dead. My set will not power on at all.
Any suggestions or any known common failures to look for ?
Cheers |