how about Epson sx230 ?
|This must have been a common failure as the 145 added a separate current-limiter pc bd to the unit, which is very simple. I plan to add
this to my unit as well, to protect the output transistors from frying.
|Pulled off solder pad
|So in my attempt to fix, when removing the damaged R509 resistor, I guess I pulled out the solder pad on one of the holes (the hole closest to Q503). Now solder will not stick when soldering a new resistor back in. After doing some research, folks fix t
|Lexus GX470 Mark Levinson Amplifier
|Does anyone have circuity schematics for Lexus GX470 Mark Levinson amplifier (Harman/Becker). Part No. 86280-0W490 (or similar). Thanks a lot!
|Epson Stylus SX230 service manual please ?
|INSIGNIA 32" NS-LDVD32Q-10A
|Everything works good except the cable connector is loose. I took the back off of the set and found the connector had come loose from the mounting and the center wire for the cable was not connected. I believe this is a simple solder fix, and would like t
|Usually those connectors 'come loose' from too much force being brought to bear.
Is there a lead remnant still in the mounting hole area of tuner that a wire could be soldered to? If so, Tack a wire to it and prove that tuner still works before deciding.
|Vizio VW32L HDTV10A No Picture and No Sound
|Looking for a little help on my Vizio 32" flat screen. When I plug it in the standby light comes on lighting the VIZIO insignia amber. When I hit the power on button on the remote or on the tv buttons, the VIZIO insignia turns white and the back ligh
|You can get the Epson Stylus SX230 service manual at www.schematics.me