| Date | Header | Text |
|---|
| 09-08-2009 | Infinity SSW 210 has no audio output | :?: Has anyone found a Service Manual for the Infinity SSW-210 or better yet what component corrects the no output problem? A schematic could help if I can't get the Service Manual. I've tried both the low level and high level inputs but hear nothing at |
| 09-08-2009 | Re: Infinity SSW 210 has no audio output | [quote:1de8dce7bb="CQNoAudio"]:?: Has anyone found a Service Manual for the Infinity SSW-210 or better yet what component corrects the no output problem? A schematic could help if I can't get the Service Manual. I've tried both the low level and high le |
| 09-08-2009 | DVD player won't play CD's | Hello, I have a Marantz DV-9500 DVD player and it plays everything fine but CD's. I have changed the laser assembly and still have the same problem. If I tilt the machine sometimes I can get a disc to play and sometimes if I have been using the machine fo |
| 09-08-2009 | Infinity SSW 210 has no audio output | Actually I haven't started measuring any voltages. I'm not sure which pins on the IC are the output pins. I guess I could get the part number off the IC and get the specs on it. |
| 09-08-2009 | SA-AK500 | I have a panasonic cd stereo system model sa-ak500. Every time i put a cd into the cd changer I get a message on the display that says "No Disc". It won't recognize a disc in any of the 5 slots. No matter if the disc is a regular music cd or a c |
| 09-08-2009 | SAMSUNG MOD TC9895TB WONT PWR ON | hello,
i bought a used samsung mod tc9895tb tv the other nite. it worked fine that nite. the next day it would not pwr up. the red led on the front panel, near the infered recevier lens stays on all the time. (maybe in stand-by mode?) next to the red |
| 09-08-2009 | | Dust off the pickup and try it again. :wink: |
| 09-08-2009 | | Try searching for the User's Manual. It will contain a wealth of info on how the set is supposed to work, what the lights mean or don't mean, etc. :D |
| 09-08-2009 | Sony owner manual | I'd like an owner manual for the next tv type:KV-29C5D
Thanks a lot
Best regards:Schartner |
| 09-08-2009 | | Not familiar with the specific unit but sounds like you may have a spindle motor problem or possibly some mechanical/alignment issue? (of course if it is supplied separately)
Is the pickup able to travel freely all the way to home position and outward?
|
| 09-08-2009 | | Go to the Sony site and get it.
[email protected] |
| 09-08-2009 | LCD TV dont start !!! | Hi , I have Hanseatic LC20TD with board PLVM01 rev no. 05 . My TV dont power up , only stand by mode with red light from LED. ( I think this is same models DMTECH LT20DV2 and Rolsen RL-20D20D ) . I was check all fuses and its OK. LM2576T3.3 switcher and |
| 09-08-2009 | SAMSUNG MOD TC9895TB WONT PWR ON | hi jst1957,
ive been looking online for a users maual, no luck so far. thanks for the info tho!...bob |
| 10-08-2009 | | STK4050 used as a servo amp. |
| 10-08-2009 | | :idea: Found the following:
1) C951 = 4.7ufd/250V
2) Suggest changing these caps in standby power supply (near relay) 4.7mf at 250 volt, 1000 at 25 volt, check main cap 220? at 200.
3) Clicks, no power.
Check junction of cathodes, diodes D802/80 |
| 10-08-2009 | RCA F19430 powers up, dies | This set has been working fine until recently. I opened the chassis and noticed that when I plug it in, it fires up for about 3 seconds and then stops. If I turn it off and then back on, it doesn't even fire at all, only if I completely unplug it and th |
| 10-08-2009 | | Press following keys on RC: MUTE - IDEAL - OK |
| 10-08-2009 | | Well now I am completely lost.
I have followed the tests in the manual and all voltages are present. The problem i have is that it states to disconnect the pcbs and then check if VA (60v) and VS (80V) are present on the psu, if so the psu is defective.
|
| 10-08-2009 | | Some useful info here:
http://www.avforums.com/forums/dvd-players/892781-no-cd-playback-marantz-dv9500-please-help.html |