Date | Header | Text |
04-12-2008 | | my wife was using it at the time. she said she heard a puff sound inside the unit. it shouldnt been the cap as it was round and looked burned but didnt had openings in itself.
:oops: how do i test the relay?
the 12 pin connector looks good, yes i |
04-12-2008 | | This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
04-12-2008 | Saved up for this and now it's dead. | Hello Everyone,
I hope someone can help.
We saved up for a long time to afford a surround sound and dvd unit....our first.
It worked for a year and now it is totally dead.
No warranty left.
It simply has no power.
It won't turn on......i |
04-12-2008 | | so ive tested the relay. apparently is good.
its giving me infinite on the open part of the relay and in the control pins is giving me 282 ohm when measuring on the 2000 scale of the meter.
ill proceed to testing the resistors on the sw side.
h |
04-12-2008 | service manual for konica 4355 | Hello
I need the service manual for konica 4355, I need quit the error code F34-2. tanks! for informacion. |
04-12-2008 | | Hi there,
I dont know this model exactly and not sure of your skills but the first thing to check would be a quick search of the PSU board and look for any type of fuse. Usually on the PSU board there will be a glass fuse and you can see quiet easily i |
04-12-2008 | | This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
04-12-2008 | same problem | I've got the same problem. Did you find a fix? |
04-12-2008 | | No need to test the relay. What I asked was if it is making a clicking sound indicating that it is activated or not. Also, What were exactly the caps that you replaced? reference numbers?
btw, happened to find a schematic in the archive |
04-12-2008 | | sMIT,
Thanks so much for your reply.
I smell no burn smell.
I have taken the top cover off the unit and can see all the magical parts in there.
My skills in this department of low. But I can definately execute the diagnosis ( if I have the n |
04-12-2008 | | i have the full schematics with the whole block diagrams, printed circuit boards and everything. If you need to take a look at those ill be more than happy to send em to you.
i replaced caps: c2901 and c2910 in the amplifier board.
by checking the |
05-12-2008 | Panasonic PT-51G44A Service Manual NEEDED | Can anyone get one |
05-12-2008 | Re: sony tv | [quote:95a7c4540a="leafar"]can anyone help me to findout the value of capacitor 1620 in g-board and vdr 601 got burn near the ac input of my tv old model kv-29hx1.pls help[/quote:95a7c4540a]
changed these capacitors and the TV had powered up already b |
05-12-2008 | Re: sony tv | [quote:5199d3337d="Anonymous"][quote:5199d3337d="leafar"]can anyone help me to findout the value of capacitor 1620 in g-board and vdr 601 got burn near the ac input of my tv old model kv-29hx1.pls help[/quote:5199d3337d]
changed these capacitors and th |
05-12-2008 | | can anyone tell me whats a component with a letter Q and whats K??? im kinda lost on that in the schematics. I can find out how to test i just need to know what that stands for. |
05-12-2008 | | Unfortunately these units are made as throw away's. I'll look it up but I already did a quick check and found nothing. |
05-12-2008 | | Thanks.
I will send it to the trash. |
05-12-2008 | | [quote:8f7432ebe9="javelinpr"]can anyone tell me whats a component with a letter Q and whats K??? im kinda lost on that in the schematics. I can find out how to test i just need to know what that stands for.[/quote:8f7432ebe9]
Q is designation for a tr |
05-12-2008 | | [quote:e59dd6ff66="javelinpr"]i have the full schematics with the whole block diagrams, printed circuit boards and everything. If you need to take a look at those ill be more than happy to send em to you.
i replaced caps: c2901 and c2910 in the amplif |
05-12-2008 | i need something | hi
i need to know what is the LNB1 and LNB2 for technosat IR7000, beacuse i change it by mistake, please :?: |
05-12-2008 | | :) Hi, I am new in this forum, I also think you are right that you haven't trust him , because one of my friends has such a situation and ..lose his money :( |
05-12-2008 | TELEPHONE DIVERTORS | Hi Folks
Does anyone know of a device from China that can be connected into a phone line and programmed to call up to 12 different numbers
the application is needed after a pre programmed hard wired auto dial unit.
the device is then connected and redi |
05-12-2008 | Re: problem with my car central key | [quote:c5e5be1f58="marchix"]I have a problem.. If You can, please help me. Opel Vectra 1998 . when I want to unlock or lock my car with pult ( my car has a central key) it does not working. When I open my car with key it is working. I think, that my pult |
05-12-2008 | gigaset 3000 problem | My trusty gigaset a few weeks haw a problem.When i receive a call the receive button does not work even if i press the button many times.
It works only when i pick up the other phone.
Also when i dial a number and press the call button does not work.
I |
05-12-2008 | factory settings in service mode | By mistak I am changed the factory settings in service mode
So please tell me the detail factory settings for Onida Oxygen Thunder 21"
Please tell me on [email protected] |
05-12-2008 | bs3206hi | i have this bluesky tv and cant find a remote code for sky and it does not seem to work with sky hd box plz email if you can help [email protected] |
05-12-2008 | | 'pult has some problem'
What is a 'pult'? |
05-12-2008 | Fixed | Yes Gary, degauss thermistor fixed it. Many thanks
Aidan |
05-12-2008 | CD Player Skipping And Running Backwards! | Hello.
I have a Micromega Leader II CD player (Which is based on a Pioneer machine I think) which uses a Phillips swingarm transport. For a few years now the player has often been reluctant to start playing the disk, takes a few goes to find the start, |