Date | Header | Text |
10-10-2011 | no power on tv | i have Magnavox 50MF231D/37 ,over suden i have no power on the tv ,i checked the power supply i found that the first feuse blow up where the a/c input is so i replace it (6A 125v) it worked so after day or so it when back & blow agian ,what could b |
10-10-2011 | | Before you decide to replace the IP board (inverter + power supply), i suggest you to double check the output voltage from the PSU secondary side to trace out which voltage lines was cause the symptom. I had seen this model of service manual inside the LC |
10-10-2011 | service manual novatron d1000 | hello everyone , please help me I need this service manual studio light novatron d1000
thanks
:D |
10-10-2011 | about printers epson | Hello
I Don't know exactely how to
reset softwar for new epson printers lik TX 106/TX109..
pri |
10-10-2011 | kenwood kdc-241 in protect mode | hi, i have a kenwood kdc-241 for repair, it fires up and just says protect on the screen. i have removed the audio output ic but it is still saying the same message, im thinking it could be something related to the proccesor but i dont have a circuit diag |
10-10-2011 | kenwood kdc-241 | hi, i have a kenwood kdc-241 for repair, it fires up and just says protect on the screen. i have removed the audio output ic but it is still saying the same message, im thinking it could be something related to the proccesor but i dont have a circuit diag |
10-10-2011 | | [url]http://elektrotanya.com/kenwood_kdc-138_mp208_mp238_139_mp239_mp3039_mp339_mp439_241_w241_w3041_w312_sm.pdf/download.html[/url] |
11-10-2011 | | D663 and D664 check fine on a diode checker and I even swapped them to see what happens, no change. R667 & R668 are also reading 10 ohms like they are supposed to so I don't know why I'm not getting 20v off that diode. Isn't T661 pin 2 a secondary s |