Date | Header | Text |
25-01-2010 | N2750W (PCB fsp204-2f01) - same symptoms, test mode OK? | I am working on a N2750W with the same power problem described in the thread. I have not checked the power supply board yet (fsp204-2f01, used also on many 26-32" models), for the following reasons:
1. the service manual says "check voltage |
25-01-2010 | | Sory want video in, not tv out. |
25-01-2010 | Need power pushbutton for Mitsubishi M-VR400 A/V receiver | My Mitsubishi M-VR400 A/V receiver has a broken power pushbutton. This is a plastic (non-electrical) piece that pushes on a micrswitch mounted on a circuit board inside. I called Mitsubishi but they won't sell me the part, give me the part number, or send |
25-01-2010 | 37 inch Mag Lcd | I may be able to find you one .I have to check I worked on one and the power supply and main board were shot.but the screen was good.Ill check. |
25-01-2010 | Fujitsu Siemens Scaleoview C19-9 eeprom/diagram needed pleas | Hi all,
I am in need of a dump/diagram for my pc monitor, which works, but I'm unable to get the OSD working. the only button that works out of the 4 is the power...
Any help please and thank you in advance
Kind regards
Mielie |
25-01-2010 | Complaint | [i:a1e2855e24]I Have A 50" Plasma Tv -LG.Two Days Ago A Thin Green Line Going From The Top Of The Screen To The Bottom Appeared But Now There Is Two Of Them
[/i:a1e2855e24] |
25-01-2010 | Complaint | [i:8d68d24f4f]I Have A 50" Plasma Tv-Lg.Two Days Ago A Thin Green Line Appeared From Top To Bottom Of Screen And Now There Are Two [/i:8d68d24f4f] |
25-01-2010 | | [quote:337f08284e="jts1957"][url]http://elektrotanya.com/sony_[b:337f08284e]gv-d300_e[/b:337f08284e],900_e.pdf/download.cgi[/url] :!: Should learn to be more patient.[/quote:337f08284e]
Model Number "MATCHES." And it's "FREE." :r |
25-01-2010 | | Power supplies need a signal to turn "on." When you put your set into test mode, the power supply gets this signal to turn "on." When you try to turn your set "on" normally, the power supply must not be getting this signal. U |
25-01-2010 | | See if you can obtain a "Service Manual" for it. In the manual there should be exploded views of the receiver including the front panel. That should point you to the part number for the button (or assembly that contains the button). Mitsubishi s |