|25-09-2008||funny||I have a korg and it is doing the same thing did you ever get the problem resolved? I kept pushing it down so much it wont work period.|
|25-09-2008||I have this manual. Contact me email.
|25-09-2008||Sony STR DE 915||Looking for a Sony STR DE 915 service manual. Thanks in advance, HW|
|26-09-2008||ave you found the manual for the Elura 100?
have you found service manual for you Elura 10 camcorder.
|26-09-2008||usb wiring configuration||my wireless card broke at the USB port, i would like to know the wiring configuration the model is a pantech um150vw
there is a ground(i think) larger black wire
then theres four more wires that are the same size
green, white, red, black i can sold|
|26-09-2008||torbjorn thank you for your reply. Yes unfortunately where I live - Malta (small island) there are high humidity issues. Was just wondering if a 100W incandescent bulb would actually heat the space inside the enclosure hence eliminating possible high humi|
|26-09-2008||Samsung SCC-101AP surveillance camera sony super had REPAIR||Further question: Has Sony Super had sensor system 2 different input voltages, one 5v for the sensor and one 9v for the output controller board? The board has pins marked L, 5, 9, G ? G is for Ground. Need to be absolutely sure before further testing wha|
|26-09-2008||I don't think the filter capacitors should be affected, it is more likely that the problem is leakage (creepage) currents on the PCB surface.
You could check whether the PCBs are clean or if there is lots of flux residue etc from the wave soldering pro|
|26-09-2008||It is clearly described in the USB standard which can be downloaded at http://www.usb.org/developers/docs/|
|26-09-2008||poor soldering on frame ic would usually cause set to shut down with error code of 13, and picture would not appear without restarting, if picture appears on its own after 10-15 mins and occasionally mutes for another 10-15 mins would still bet on crt.|
|26-09-2008||SM||I´m need SM for Sharp DVD HT-CN 400DVH.
Please upload this.
Thanks for help.
|26-09-2008||National VP-5220A Repair Help Please.||I've just recently been given a National VP-5220A oscilloscope. I was awfully excited as I've always felt the need for one but never stood the chance of affording one. I can't get it working though. I was told by the man who gave it to me that it had work|
$9.99 and instant download.
|26-09-2008||Centrum Xamba 500 or Lenco DW7210, Mag DW7210, HDRV80||Hello!
I would be greatful if someone has a servicemanual for:
Lenco DW7210 DVD/Harddrive Player-Recorder.
Also known as a Mag DW7210.
Also known as model HDRV80, make unknown.
Also known as Centrum Xamba 500.
Thanks in advance.
|26-09-2008||True, but I've fixed many Sony's that the crt filaments are lit, set had sound and high voltage but no osd or raster. I'm not saying the vertical ic is bad to cause a hard fault but may have cold solder joints. Could it also be a weak crt, yes.|
|26-09-2008||Sony STR DE 915||I'm looking for a Sony STR DE 915 service manual. Thanks in advance, HW|
|26-09-2008||Question about a radio circuit diagram.||Hello everyone !!!
I have an old radio (Luxor Sweden) called "Applaud" type: 3891W from about the 60-th. It have FM band also. I need a circuit diagram to repair my exemplar. It is a tube radio.
Regards from RepairUncle
Note. I have pho|
|26-09-2008||This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from http://www.justmanuals.com