Date | Header | Text |
09-01-2011 | | No thoughts??? |
09-01-2011 | | hi,thanks,i try chek it and go back,
yes led is flickering and i hear a sound like that chik..chik .chik! |
09-01-2011 | | Wow.
I just stumbled across this post and I have to say THANK YOU SO MUCH!
I was having the exact same problem with my Xboard 25, and the calibration menu seemed to have fixed it!
Thanks again! |
09-01-2011 | | Another thing to check on 12V line is:
D810 (UF5402) in the PSU might be short-circuit. |
09-01-2011 | | Full make and model is always helpful.
If banging the TV cured the fault in its beginning stages, that points to dry-joints (or what the yanks call cold-joints). You need to look for any poor solder joints in the TV, or ask an engineer to look it over. |
09-01-2011 | | Resolder delay line DL302. |
09-01-2011 | | It might be the GP2 chassis. Try to find out which it has. If it is the GP2, check these:
- IC880 temperature sensitive (with small black heatsink to the right of the tuner). 9V at CRT socket L2 pin 1 drops to approximately 7V, then appliance switches |
09-01-2011 | | eBay. Everything is on there.
cgi.ebay.co.uk/20-pcs-High-Voltage-Ceramic-Capacitor-2KV-2200pF-222-/110527927932?pt=LH_DefaultDomain_0&hash=item19bbfa567c
I think you may find that more than just that capacitor has failed on the board... The beep |
09-01-2011 | | If anyone has issues with the flex connectors adhering to the edges of the LCD screen itself, there is a fix available other then packing with something to apply pressure to the faulty connector.
3M manufacture a conductive tape that conducts through t |
09-01-2011 | | I replaced D800,D806,optocopler: IC 801,C623 :33mf/160v,C826: 47mf/160v,c822,c856,c812 but TV is in standby stat still.
when I conect R118 to ground TV turn on and power led stay green.
also voltage of Drain pin of Mosfet Q801 is unstable (27v...110v) |
09-01-2011 | zenith tv dark picture | hi am workin a zenith tv model isz2045dt the picture is very dark
i bring the brightness full and i also bring up the bright on the flyback but pic is still dark.t found two badly caps close to the flyback i change them but still the same way.any ideas w |
09-01-2011 | Integrado la 7672 | Buenas noches.
Quisiera saber si alguien me puede informar sobre el integrado la7672. su estructura? Gracias! |