Date | Header | Text |
03-04-2009 | | Voltages?
Is Raw B-Plus present?
Is Regulator getting same?
Is regulator drive IC also getting start up voltage, and is it outputting a drive signal?
Does power supply get signal to "turn On?" |
03-04-2009 | Rinex Tv unlock | Holding the music button down for 10 seconds when the tv is locked definitely works! Thanks Bertus for your input. Saved me a great deal of money and trouble! |
03-04-2009 | Instek GPC-3030DQ Service Manual | I am seeking a copy of the service manual or schematic of the GW Instek model GPC-3030DQ Triple Output DC Lab Bench Power Supply.
Thanks, brlpe |
04-04-2009 | | I am not 100% sure where to check for the voltages you just described, I usually use a schematic because I don't know where to check. All I know for sure is I have 120 in, nothing out. |
04-04-2009 | laser printer service manual | :roll: service manuasl for Brother HL 5130 and canon LBP 5000 |
04-04-2009 | | I have them both on my site at http://www.justmanuals.com |
04-04-2009 | Samsung LCD Monitor 943BX | Hi All
I have a Samsung 943BX - need to get the case apart.
Anyone know the location of the tabs or any other hints?
Again, another situation where manufacturer refuses to use screws.
Thanks much. |
04-04-2009 | | A thin flat flexible "putty knife" and patience works well (in most cases) for me. |
05-04-2009 | Samsung (Sung what?!) 943BX | Thanks jts1957 for the reply. I did get it open earlier, just after my first post. It's just like the Dell's and all the rest. Patience is the key.
By the way - Here's a tip - I use one of the skinny flat 6" steel rulers with tape over the insert |