Date | Header | Text |
11-04-2008 | | Unless you have access to the pinouts and familiar with drive circuitry, it is not worth the trouble. Even if you could figure out the pins, the video processor is most likely unable to detect correct resolution. |
11-04-2008 | | hmm when you say video processor do you mean the GPU? the intel GMA915 gpu is capable of the resolution of the M200 LCD. I'm willing to learn and see this as a project, any idea where I could get a hold of the pinouts?
thanks. |
11-04-2008 | | oops. Intel GMA 900 is what it should have been. |
11-04-2008 | Needing Help! SAE Two A-14 audio amp problem | My electronics tech is having trouble fixing an SAE Two amplifier
model A-14. It has no audio output. If he shorts across the speaker output
circuit protection relay the audio works fine. He has a good service manual
but can't track down what the pr |
11-04-2008 | | Don't forget to check the 3.9 ohm resistors and pico fuses. |
11-04-2008 | | I'm here, they changed up my route. What's the model? |
11-04-2008 | | The vertical IC will start with LA78##. Usually the 100uf 50vdc cap next to it. I'd replace all the caps around it. |
11-04-2008 | | Seine board? Tell him to learn what he's doing. The suspect would be the t-con board/logic board. |
11-04-2008 | | Replace your convergence ic's. |
11-04-2008 | | Customer Menu or service menu? |
12-04-2008 | | Correct, that would be the GPU but, have no idea on where to get the pinout info? |
12-04-2008 | Renault Clio | I have disconnected the battery on my 1999 Renault clio and now the clock and stereo display does not work. All the fuses are ok and there is power going to the stereo. A garage has checked it over and has said that the dash has to come out as everything |
12-04-2008 | MACKIE SA1232Z | Service Manual Mackie 1232z |
12-04-2008 | MACKIE SA1232Z | Need a Service Manual for MACKIE SA1232Z |