i have onida TRU SLIM one channel not showing there is some massage like enter lock code pls....
i dont no what is lock code so pls help me/......|
|12-12-2012||Your answer is contained in the User Manual that comes with all such TV's when purchased new. You probably:
1) discarded thinking 'it's just packing material,' or
2) who's got time to read, or
3) got 'such a deal' on the set used and didn't come with,|
|12-12-2012||Schematic need for Reloop PA 1600||Hello!
I need a schematic or service manual for Reloop PA 1600 Amplifier
Thanks in advance!|
|12-12-2012||Kaput like mine||I found a few swollen caps on the DSP board - as you are looking @ the face of the amp its the one on the left side - just left of centertoward the back of the amp.
The swollen cap tops are actually near the middle of the amp, just left of the mid point |
Please read the pdf at
|13-12-2012||USB camera||Y'know if you had one of those usb cameras, you could get into the main board onto the left side of the amp as you are facing it, and look @ the cap top to see if it was swollen. Mine would have easily been seen with a usb camera.
|13-12-2012||What does +3v3a or +5vv mean in the schematic||What does "3v3a" mean in a schematic, I see it next to a connector like it comes out of the rectifier bridge then the smoothing caps etc then it says +3v3a. I also see it in - else where, and I see +5vd or +5VV or -5VV ...
What does that mean|
|13-12-2012||ya don't use magnets try using a degaussing coil to degauss for crt types|